UCOM(4)                 NetBSD Kernel Interfaces Manual                UCOM(4)

     ucom -- USB tty support

     ucom* at u3g?
     ucom* at uark?
     ucom* at ubsa?
     ucom* at uchcom?
     ucom* at uftdi?
     ucom* at ugensa?
     ucom* at uhmodem?
     ucom* at uipaq?
     ucom* at ukyopon?
     ucom* at umcs? portno ?
     ucom* at umct?
     ucom* at umodem?
     ucom* at uplcom?
     ucom* at uslsa?
     ucom* at uvisor? portno ?
     ucom* at uvscom?

     The ucom driver attaches to USB modems, serial ports, and other devices
     that need to look like a tty.  The ucom driver shows a behaviour like a
     tty(4).  This means that normal programs such as tip(1) or pppd(8) can be
     used to access the device.

     The portno locator can be used to decide which port to use for device
     that have multiple external ports.

     Note that while ucom supports the (undocumented) pulse-per-second API
     normally used on conventional serial ports, USB serial devices typically
     have a varying latency around 1 ms due to the USB frame structure.

     The ttyXX devices are traditional dial-in devices; the dtyXX devices are
     used for dial-out.  (See tty(4).)



     tty(4), u3g(4), ubsa(4), uchcom(4), uftdi(4), ugensa(4), uhmodem(4),
     uipaq(4), ukyopon(4), umct(4), umodem(4), uplcom(4), usb(4), uslsa(4),
     uvisor(4), uvscom(4)

     The ucom driver appeared in NetBSD 1.5.

NetBSD 8.1                    September 29, 2016                    NetBSD 8.1

You can also request any man page by name and (optionally) by section:


Use the DEFAULT collection to view manual pages for third-party software.

©1994 Man-cgi 1.15, Panagiotis Christias
©1996-2019 Modified for NetBSD by Kimmo Suominen