SM(4)                   NetBSD Kernel Interfaces Manual                  SM(4)

     sm -- SMC91Cxx-based Ethernet interfaces device driver

     sm0 at isa? port 0x300 irq 10
     sm* at mhzc?
     sm* at pcmcia? function ?
     sm* at nubus?

     The sm device driver supports SMC91C9x-based and SMC91C1xx-based Ethernet

     The ISA attachment of the sm driver supports any SMC91C9x-based Ethernet
     interface on the ISA bus, including the EFA Info*Express SVC VLB inter-
     face, and the on-board SMC91C9x Ethernet found in many embedded PCs and
     laptop docking stations.

     The mhzc attachment of the sm driver supports the Megahertz combo Ether-
     net and modem card.

     The PCMCIA attachment of the sm driver supports Megahertz X-JACK Ethernet

     The nubus attachment of the sm driver supports SMC-based Ethernet cards
     for the macintosh.

     The SMC91C1xx supports the MII interface and so the list of supported
     media depends on several factors, including which PHY is attached.  The
     SMC91C9x supports AUI and UTP media types.

     To enable the AUI media, select the 10base5 or aui media type with
     ifconfig(8)'s media directive.  To select UTP, select the 10baseT or utp
     media type.

     ifconfig(8)'s -m option will display the full list of supported media
     directives for a particular configuration.

     sm0: unable to read MAC address from CIS  This indicates that the Ether-
     net address, which is stored in the CIS information on the Megahertz X-
     JACK PCMCIA Ethernet card, is corrupted.

     ifmedia(4), intro(4), isa(4), mhzc(4), mii(4), pcmcia(4), ifconfig(8)

NetBSD 8.1                     November 10, 1997                    NetBSD 8.1

You can also request any man page by name and (optionally) by section:


Use the DEFAULT collection to view manual pages for third-party software.

©1994 Man-cgi 1.15, Panagiotis Christias
©1996-2019 Modified for NetBSD by Kimmo Suominen