SIOP(4)                 NetBSD Kernel Interfaces Manual                SIOP(4)


NAME
siop -- Symbios Logic/NCR 53c8xx SCSI driver
SYNOPSIS
hp700 siop* at mainbus? irq 3 siop* at phatomas? irq 3 PCI siop* at pci? dev ? function ? options SIOP_SYMLED scsibus* at siop?
DESCRIPTION
The siop driver provides support for the Symbios Logic/NCR 53x8xx series of SCSI controller chips: - 53c810, 53c810a and 53c815 (Fast SCSI) - 53c820, 53c825 and 53c825a (Fast-Wide SCSI) - 53c860 (Ultra SCSI) - 53c875 and 53c875j (Ultra-Wide SCSI) - 53c876 (Dual Ultra-Wide SCSI) - 53c885 (Ultra-Wide SCSI and Ethernet) - 53c895 (Ultra2-Wide SCSI) - 53c896 (PCI 64bit, dual Ultra2-Wide SCSI) - 53c1010-33 (PCI 64bit, dual Ultra160 SCSI) - 53c1510d (PCI 64bit, dual Ultra2-wide SCSI) The SIOP_SYMLED option causes the driver to report SCSI activity on the GPIO pin 1, which is connected to the activity LED on some adapters. At this time only the 53c895 based Symbios and Tekram adapters are known to require this. If both siop and the esiop(4) drivers are compiled, esiop(4) will take precedence for controllers it supports.
SEE ALSO
cd(4), ch(4), esiop(4), intro(4), pci(4), scsi(4), sd(4), st(4), uk(4)
HISTORY
The siop driver first appeared in NetBSD 1.5.
AUTHORS
The siop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for NetBSD.
BUGS
siop supports the 53c1010-33 in Ultra2-wide mode only. Use esiop(4) for Ultra160 support. NetBSD 5.0_RC4 April 5, 2008 NetBSD 5.0_RC4

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


Powered by man-cgi 1.15, Panagiotis Christias
Modified for NetBSD by Kimmo Suominen