SIISATA(4) NetBSD Kernel Interfaces Manual SIISATA(4)
siisata -- Silicon Image SATA-II controllers driver
siisata* at pci? dev ? function ?
The siisata driver supports the Silicon Image SteelVine family of SATA-II controllers, interfacing the hardware with the ata(4) and atapi(4) sub- systems. The following controllers are supported by the siisata driver: Silicon Image SiI3124 4-port PCI/PCI-X Silicon Image SiI3132 2-port PCI-Express x1 Silicon Image SiI3531 1-port PCI-Express x1
ata(4), atapi(4), pci(4), wd(4)
The siisata driver first appeared in NetBSD 5.0.
The siisata driver was written by Jonathan A. Kollasch <firstname.lastname@example.org>.
SATA Native Command Queueing is not yet supported. Device hot swapping is not yet supported. Silicon Image's Software RAID is not yet supported by the ataraid(4) driver. raid(4) can be used instead. NetBSD 5.0_RC4 May 21, 2008 NetBSD 5.0_RC4
You can also request any man page by name and (optionally) by section: