SATALINK(4)             NetBSD Kernel Interfaces Manual            SATALINK(4)


NAME
satalink -- Silicon Image SATALink disk controller driver
SYNOPSIS
satalink* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The satalink driver supports the Silicon Image SATALink 3112 2-port and 3114 4-port Serial ATA controllers, and provides the interface with the hardware for the ata(4) driver. The 0x0002 flag forces the satalink driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debugging aid, or to work around problems where the SATA controller is wired up to the system incorrectly.
SEE ALSO
ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4) NetBSD 5.0_RC4 December 19, 2003 NetBSD 5.0_RC4

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


Powered by man-cgi 1.15, Panagiotis Christias
Modified for NetBSD by Kimmo Suominen