MOUNT_AUTOFS(8)         NetBSD System Manager's Manual         MOUNT_AUTOFS(8)

NAME
     mount_autofs -- mount automounter filesystem

SYNOPSIS
     mount_autofs [-f from] [-O master_options] [-o options] [-p prefix]
                  autofs mount_point

DESCRIPTION
     The mount_autofs command should not usually be called by admins.  Use
     automount(8) instead.

     The mount_autofs command attaches the automounter filesystem on the
     autofs device on to the file system tree at point mount_point.  Both
     autofs and mount_point are converted to absolute paths before use.

     This command is normally executed by automount(8).  The options are as
     follows:

     -f      Set the from location for autofs(5).  This argument is usually
             read from /etc/auto_master by automount(8).

     -o      Set the mount options.  See the mount(8) man page for possible
             options and their meanings.

     -O      Set the autofs(5) options.  See the [-options] in AUTO_MASTER
             SYNTAX of auto_master(5).

     -p      Set the autofs(5) prefix, below which the file system(s) will be
             mounted.

SEE ALSO
     autofs(5), fstab(5), automount(8), mount(8)

HISTORY
     The mount_autofs utility first appeared in NetBSD 9.0.  The mount_autofs
     utility first appeared in DragonFly 5.1.

     This manpage first appeared in DragonFly and has been ported to NetBSD.

NetBSD 9.0                     January 23, 2018                     NetBSD 9.0

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias
©1996-2019 Modified for NetBSD by Kimmo Suominen