MKUBOOTIMAGE(1)         NetBSD General Commands Manual         MKUBOOTIMAGE(1)


NAME
mkubootimage -- create U-Boot loader image
SYNOPSIS
mkubootimage [-h] -A (arm|arm64|i386|mips|mips64|or1k|powerpc) -a address [-C (bz2|gz|lzma|lzo|none)] [-E address] [-e address] [-m magic] -n image [-O (freebsd|linux|netbsd|openbsd)] -T (fs|kernel|kernel_noload|ramdisk|standalone) source destination
DESCRIPTION
The mkubootimage utility is used to create an image for Das U-Boot, the "Universal Boot Loader". The arguments are as follows: -A (arm|arm64|i386|mips|mips64|or1k|powerpc) Defines the architecture. This is required. -a address Sets the image load address. This is an integer between 0 and UINT32_MAX. This is required for all image types except for script, ramdisk, and kernel_noload. -C (bz2|gz|lzma|lzo|none) Defines the compression. The default is "none". -E address Define the entry point. This is an integer between 0 and UINT32_MAX. This option is the same as -e but it inverts the bytes to convert the 32 bit integer from little to big endian (or vice versa). If -E or -e are not set, the entry point defaults to the image load address (-a). -e address Define the entry point. This is an integer between 0 and UINT32_MAX. If -E or -e are not set, the entry point defaults to the image load address (-a). -h Display the usage and exit. -m magic Set the magic. This is an integer between 0 and UINT32_MAX. The default is "0x27051956". -n image Defines the image name. This is required. -O (freebsd|linux|netbsd|openbsd) Defines the operating system type. The default OS name is "netbsd". -T (fs|kernel|kernel_noload|ramdisk|standalone|script) Defines the image type. This is required. The required source argument is the filename of the kernel that is read. The required destination argument is the filename of the image file that is created.
EXIT STATUS
mkubootimage returns 1 on failure to read the kernel, generate a header, or create the image.
EXAMPLES
Before the image is written, the header is displayed to standard out; for example: magic: 0x27051956 time: Tue Jun 7 15:58:41 2011 size: 2482203 load addr: 0x00020000 entry point: 0x00020000 data crc: 0x700fdf53 os: 2 (netbsd) arch: 7 (powerpc) type: 2 (kernel) comp: 1 (gz) name: NetBSD/evbppc 5.99.52 (INSTALL_PMPPC) header crc: 0x94ea96cf
SEE ALSO
"Das U-Boot - the Universal Boot Loader" http://www.denx.de/wiki/U-Boot/
HISTORY
The mkubootimage command first appeared in NetBSD 6.0.
AUTHORS
The mkubootimage utility was originally written by Jared D. McNeill. This manual page was written by Jeremy C. Reed. NetBSD 8.1 July 15, 2017 NetBSD 8.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


Powered by man-cgi 1.15, Panagiotis Christias
Modified for NetBSD by Kimmo Suominen