LJ4_FONT(5)                                                        LJ4_FONT(5)

       lj4_font - groff fonts for use with devlj4

       Nominally,  all  Hewlett-Packard  LaserJet 4-series  and newer printers
       have the same internal fonts:  45  scalable  fonts  and  one  bitmapped
       Lineprinter  font.   The  scalable fonts are available in sizes between
       0.25 point and 999.75 points, in 0.25-point increments; the Lineprinter
       font is available only in 8.5-point size.

       The  LaserJet  font  files included with groff assume that all printers
       since the LaserJet 4 are identical.  There are some differences between
       fonts in the earlier and more recent printers, however.  The LaserJet 4
       printer used Agfa Intellifont technology for 35 of the  internal  scal-
       able  fonts;  the remaining 10 scalable fonts were TrueType.  Beginning
       with the LaserJet 4000-series printers introduced in 1997, all scalable
       internal fonts have been TrueType.  The number of printable glyphs dif-
       fers slightly between Intellifont and TrueType  fonts  (generally,  the
       TrueType  fonts  include more glyphs), and there are some minor differ-
       ences in glyph metrics.  Differences among printer models are described
       in  the  PCL 5 Comparison Guide and the PCL 5 Comparison Guide Addendum
       (for printers introduced since approximately 2001).

       LaserJet printers reference a glyph by a  combination  of  a  256-glyph
       symbol  set and an index within that symbol set.  Many glyphs appear in
       more than one symbol set; all combinations of symbol set and index that
       reference  the  same glyph are equivalent.  For each glyph, hpftodit(1)
       searches a list of symbol sets, and selects the first set that contains
       the  glyph.   The  printing code generated by hpftodit(1) is an integer
       that encodes a numerical value for the symbol set in the high  byte(s),
       and  the  index  in  the  low  byte.   See groff_font(5) for a complete
       description of the font file  format;  symbol  sets  are  described  in
       greater  detail  in the PCL 5 Printer Language Technical Reference Man-

       Two of the scalable fonts, Symbol and Wingdings, are bound to 256-glyph
       symbol  sets;  the remaining scalable fonts, as well as the Lineprinter
       font, support numerous symbol sets, sufficient to  enable  printing  of
       more than 600 glyphs.

       The metrics generated by hpftodit(1) assume that the DESC file contains
       values of 1200 for res and  6350  for  unitwidth  (or  any  combination
       (e.g.,  2400  and 3175) for which res  unitwidth = 7620000).  Although
       HP PCL 5 LaserJet printers support an internal resolution of 7200 units
       per  inch,  they use a 16-bit signed integer for cursor positioning; if
       devlj4 is to support  U.S.  ledger  paper  (11''  17''),  the  maximum
       usable  resolution is 32767 / 17, or 1927, units per inch, which rounds
       down to 1200 units per inch.  If the largest  required  paper  size  is
       less  (e.g.,  8.5''  11''  or  A5),  a  greater resolution (and lesser
       unitwidth) can be specified.

       Font metrics for Intellifont fonts were provided by Tagged Font  Metric
       (TFM)  files  originally developed by Agfa/Compugraphic.  The TFM files
       provided for these fonts supported 600+ glyphs and contained  extensive
       lists of kern pairs.

       To  accommodate  developers  who had become accustomed to TFM files, HP
       also provided TFM files for the  10  TrueType  fonts  included  in  the
       LaserJet 4.   The  TFM files for TrueType fonts generally included less
       information than the Intellifont TFMs, supporting fewer glyphs, and  in
       most  cases,  providing no kerning information.  By the time the Laser-
       Jet 4000 printer was introduced, most developers had migrated to  other
       means of obtaining font metrics, and support for new TFM files was very
       limited.  The TFM files provided for the TrueType fonts in  the  Laser-
       Jet 4000  support only the Latin 2 (ISO 8859-2) symbol set, and include
       no kerning information; consequently, they are of little value for  any
       but the most rudimentary documents.

       Because  the  Intellifont  TFM files contain considerably more informa-
       tion, they generally are preferable to the TrueType TFM files even  for
       use with the TrueType fonts in the newer printers.  The metrics for the
       TrueType fonts are very close, though not identical, to those  for  the
       earlier  Intellifont  fonts  of  the  same names.  Although most output
       using the Intellifont metrics with the newer printers is quite  accept-
       able,  a  few glyphs may fail to print as expected.  The differences in
       glyph metrics may be particularly noticeable with  composite  parenthe-
       ses,  brackets,  and  braces  used  by  eqn(1).   A  script, located in
       /usr/share/groff_font/devlj4/generate, can be used to adjust  the  met-
       rics  for these glyphs in the special font S for use with printers that
       have all TrueType fonts.

       At the time HP last supported TFM files, only Version 1 of the  Unicode
       standard  was  available.   Consequently,  many glyphs lacking assigned
       code points were assigned by HP to the Private Use Area  (PUA).   Later
       versions  of  the Unicode standard included code points outside the PUA
       for many of these glyphs.  The HP-supplied TrueType TFM files  use  the
       PUA  assignments;  TFM  files  generated from more recent TrueType font
       files require the later Unicode values to access the same glyphs.  Con-
       sequently, two different mapping files may be required: one for the HP-
       supplied TFM files, and one for more recent TFM files.

       /usr/share/groff_font/devlj4/DESC  Device description file.

       /usr/share/groff_font/devlj4/F     Font description file for font F.

       groff(1), groff_diff(1), hpftodit(1), grolj4(1), groff_font(5)

Groff Version 1.19.2           September 4, 2005                   LJ4_FONT(5)

You can also request any man page by name and (optionally) by section:


Use the DEFAULT collection to view manual pages for third-party software.

©1994 Man-cgi 1.15, Panagiotis Christias
©1996-2019 Modified for NetBSD by Kimmo Suominen