ITESIO(4) NetBSD Kernel Interfaces Manual ITESIO(4)
itesio -- ITE IT87xxF Super I/O driver
itesio0 at isa? port 0x2e itesio1 at isa? port 0x4e
The itesio driver provides support for the Environment Controller and the Watchdog Timer on the IT87xxF Super I/Os, and may be used to monitor hardware sensors or setting up a watchdog timeout value for the system. The itesio driver has 15 sensors: Sensor Units Typical Use Temp0 uK CPU Temp Temp1 uK System Temp Temp2 uK Aux Temp VIN0 uV DC Vcore A VIN1 uV DC Vcore B VIN2 uV DC +3.3V VIN3 uV DC +5V VIN4 uV DC +12V VIN5 uV DC -12V VIN6 uV DC -5V VIN7 uV DC STANDBY VBAT uV DC VBAT Fan0 RPM CPU Fan Fan1 RPM System Fan Fan2 RPM Aux Fan The itesio Watchdog Timer is configurable via the wdogctl(8) utility and has a resolution between 1 and 65535 seconds. The Watchdog Timer is not supported on the IT8705 Super I/O.
envsys(4), envstat(8), wdogctl(8)
The itesio driver first appeared in OpenBSD 3.4 and was then ported to NetBSD 4.0.
The itesio driver was written by Julien Bordet <email@example.com> and Juan Romero Pardines <firstname.lastname@example.org>.
Interrupt support is unimplemented. NetBSD 9.0 April 2, 2008 NetBSD 9.0
You can also request any man page by name and (optionally) by section: