FSCK_FFS(8) NetBSD System Manager's Manual FSCK_FFS(8)
fsck_ffs -- Fast File System consistency check and interactive repair
fsck_ffs [-adFfPpqUX] [-B byteorder] [-b block] [-c level] [-m mode] [-x snap-backup] [-y | -n] filesystem ...
fsck_ffs performs interactive file system consistency checks and repair for each of the file systems specified on the command line. It is nor- mally invoked from fsck(8). The kernel takes care that only a restricted class of innocuous file sys- tem inconsistencies can happen unless hardware or software failures intervene. These are limited to the following: Unreferenced inodes Link counts in inodes too large Missing blocks in the free map Blocks in the free map also in files Counts in the super-block wrong These are the only inconsistencies that fsck_ffs in ``preen'' mode (with the -p option) will correct; if it encounters other inconsistencies, it exits with an abnormal return status. For each corrected inconsistency one or more lines will be printed identifying the file system on which the correction will take place, and the nature of the correction. After successfully correcting a file system, fsck_ffs will print the number of files on that file system, the number of used and free blocks, and the percentage of fragmentation. If sent a QUIT signal, fsck_ffs will finish the file system checks, then exit with an abnormal return status. If fsck_ffs receives a SIGINFO signal (see the status argument for stty(1)), a line will be written to the standard error output indicating the name of the device currently being checked, the current phase number and phase-specific progress information. Without the -p option, fsck_ffs audits and interactively repairs incon- sistent conditions for file systems. If the file system is inconsistent the operator is prompted for concurrence before each correction is attempted. It should be noted that some of the corrective actions which are not correctable under the -p option will result in some loss of data. The amount and severity of data lost may be determined from the diagnos- tic output. The default action for each consistency correction is to wait for the operator to respond yes or no. If the operator does not have write permission on the file system fsck_ffs will default to a -n action. fsck_ffs has more consistency checks than its predecessors check, dcheck, fcheck, and icheck combined. The following flags are interpreted by fsck_ffs. -a Interpret the filesystem as an Apple UFS filesys- tem, even if there is no Apple UFS volume label present. -B byteorder Convert the file system metadata to byteorder byte order if needed. Valid byte orders are ``be'' and ``le''. If fsck_ffs is interrupted while swapping the metadata byte order, the file system cannot be recovered. fsck_ffs will print a message in inter- active mode if the file system is not in host byte order. -b block Use the block number block as the super block for the file system. Block 32 is usually an alterna- tive super block. -c level Convert the file system to the level level. Note that the level of a file system can only be raised. There are currently five levels defined: 0 The file system is in the old (static table) format. 1 The file system is in the new (dynamic table) format. 2 The file system supports 32-bit UIDs and GIDs, short symbolic links are stored in the inode, and directories have an added field showing the file type. 3 If maxcontig is greater than one, build the free segment maps to aid in finding contiguous sets of blocks. If maxcontig is equal to one, delete any existing segment maps. 4 Rearrange the super block to the same layout as UFS2; disable the rotational layout tables and per cylinder group block totals. In interactive mode, fsck_ffs will list the conver- sion to be made and ask whether the conversion should be done. If a negative answer is given, no further operations are done on the file system. In preen mode, the conversion is listed and done if possible without user interaction. Conversion in preen mode is best used when all the file systems are being converted at once. The format of a file system can be determined from the third line of output from dumpfs(8). -d Print debugging output. -F Indicates that filesystem is a file system image, rather than a raw character device. filesystem will be accessed `as-is', and no attempts will be made to read a disklabel. -f Force checking of file systems. Normally, if a file system is cleanly unmounted, the kernel will set a ``clean flag'' in the file system super block, and fsck_ffs will not check the file system. This option forces fsck_ffs to check the file sys- tem, regardless of the state of the clean flag. -m mode Use the octal value mode as the permission bits to use when creating the lost+found directory rather than the default 1700. In particular, systems that do not wish to have lost files accessible by all users on the system should use a more restrictive set of permissions such as 700. -n Assume a no response to all questions asked by fsck_ffs except for `CONTINUE?', which is assumed to be affirmative; do not open the file system for writing. -P Display a progress meter for the file system check. A new meter is displayed for each of the 5 file system check passes, unless -p is specified, in which case only one meter for overall progress is displayed. Progress meters are disabled if the -d option is specified. -p Specify ``preen'' mode, described above. -x snap-backup Use a snapshot with snap-backup as backup to check a read-write mounted filesystem. Must be used with -n. See fss(4) for more details. The point is to check an internally-consistent version of the filesystem to find out if it is damaged; on failure one should unmount the filesystem and repair it. -U Resolve user ids to usernames. -X Similar to -x but uses a file system internal snap- shot on the file system to be checked. -y Assume a yes response to all questions asked by fsck_ffs; this should be used with great caution as this is a free license to continue after essen- tially unlimited trouble has been encountered. Inconsistencies checked are as follows: 1. Blocks claimed by more than one inode or the free map. 2. Blocks claimed by an inode outside the range of the file sys- tem. 3. Incorrect link counts. 4. Size checks: Directory size not a multiple of DIRBLKSIZ. Partially truncated file. 5. Bad inode format. 6. Blocks not accounted for anywhere. 7. Directory checks: File pointing to unallocated inode. Inode number out of range. Dot or dot-dot not the first two entries of a directory or having the wrong inode number. 8. Super Block checks: More blocks for inodes than there are in the file sys- tem. Bad free block map format. Total free block and/or free inode count incorrect. Orphaned files and directories (allocated but unreferenced) are, with the operator's concurrence, reconnected by placing them in the lost+found directory. The name assigned is the inode number. If the lost+found directory does not exist, it is created. If there is insufficient space its size is increased. Because of inconsistencies between the block device and the buffer cache, the raw device should always be used.
The diagnostics produced by fsck_ffs are fully enumerated and explained in Appendix A of Fsck - The UNIX File System Check Program.
fss(4), fs(5), fstab(5), fsck(8), fsdb(8), newfs(8), reboot(8) NetBSD 5.0_RC4 October 9, 2008 NetBSD 5.0_RC4
You can also request any man page by name and (optionally) by section: