DE(4) NetBSD Kernel Interfaces Manual DE(4)
de -- DECchip 21040, 21140, 21141, 21142, and 21143 PCI Ethernet inter- face driver
de* at pci? dev ? function ? Configuration of PHYs may also be necessary. See mii(4).
The de driver supports Ethernet and Fast Ethernet interfaces based on the Digital Equipment Corporation DECchip 21040, 21140, 21141, 21142, and 21143 model controllers for PCI bus. 21040 10BASE-T and AUI/BNC 21140 10BASE-T and 100BASE-TX 21141 10BASE-T and 100BASE-TX 21142 10BASE-T and 100BASE-TX 21143 10BASE-T and 100BASE-TX Supported Network Interface Cards (NIC) include, but are not limited to: Accton EN1207i Cogent EM100 Asante AsanteFAST DEC DE435 DEC DE450 DEC DE500 SMC 9332 Znyx NetBlaster ZX340 series (345, 348, 346) Generally, if the NIC is for PCI bus, and the major controller chip has the DIGITAL logo on it, with one of the model numbers above, the de driver should recognize and control it. Beware, however, that many NIC manufacturers change the Ethernet controller chip without changing the product model number, and a physical inspection of the NIC, or a probe of the NIC with a PCI diagnostic tool is the only way to tell if a real DEC TULIP controller is present. Multi-port interfaces are typically configured as a PCI-PCI bridge with multiple de instances on the PCI bus on the other side of the bridge. DEC sold its semiconductor division to Intel. In addition, there are many "knock-offs" of the DEC TULIP Ethernet controller chips; NICs based on these chips are handled by the tlp(4) driver. This de driver should not be confused with the NetBSD VAX de driver for the DEC DEUNA/DELUA Ethernet controller for UniBus.
ifmedia(4), intro(4), mii(4), pci(4), tlp(4), ifconfig(8) Adaptec: http://www.adaptec.com/, Asante: http://www.asante.com/, SMC Networks: http://www.smc.com/, ZNYX Networks: http://www.znyx.com/
The de driver first appeared in NetBSD 1.1
Matt Thomas <email@example.com>. NetBSD 9.0 February 11, 2000 NetBSD 9.0
You can also request any man page by name and (optionally) by section: