BNX(4)                  NetBSD Kernel Interfaces Manual                 BNX(4)


NAME
bnx -- Broadcom NetXtreme II 10/100/1000 Ethernet device
SYNOPSIS
bnx* at pci? brgphy* at mii?
DESCRIPTION
The bnx driver supports Broadcom's NetXtreme II product family, such as the BCM5706 PCI-X and BCM5708 PCI Express Ethernet controllers, which includes the following: + Dell PowerEdge 1950 integrated BCM5708 NIC (10/100/1000baseT) + Dell PowerEdge 2950 integrated BCM5708 NIC (10/100/1000baseT) + HP NC370F PCI-X Multifunction Gigabit server adapter (1000baseSX) + HP NC370T PCI-X Multifunction Gigabit server adapter (10/100/1000baseT) + HP NC373F PCI Express Multifunction Gigabit server adapter (1000baseSX) + HP NC373i PCI Express Multifunction Gigabit embedded server adapter (10/100/1000baseT) + HP NC380T PCI Express Dual Port Multifunction Gigabit server adapter (10/100/1000baseT) + IBM xSeries 3550 integrated BCM5708 NIC (10/100/1000baseT) + IBM xSeries 3650 integrated BCM5708 NIC (10/100/1000baseT) The NetXtreme II product family is composed of various Converged NIC (or CNIC) Ethernet controllers which support a TCP Offload Engine (TOE), Remote DMA (RDMA), and iSCSI acceleration, in addition to standard L2 Ethernet traffic, all on the same controller. The following features are supported in the bnx driver under NetBSD: IPv4 receive IP/TCP/UDP checksum offload Jumbo frames (up to 9022 bytes) VLAN tag insertion Interrupt coalescing 10/100/1000Mbps operation in full-duplex mode 10/100Mbps operation in half-duplex mode The bnx driver supports the following media types: autoselect Enable autoselection of the media type and options. The user can manually override the autoselected mode via ifconfig(8). 10baseT/UTP Set 10Mbps operation. The ifconfig(8) mediaopt option can also be used to select either full-duplex or half-duplex modes. 100baseTX Set 100Mbps (Fast Ethernet) operation. The ifconfig(8) mediaopt option can also be used to select either full-duplex or half-duplex modes. 1000baseTX Set 1000baseTX operation over twisted pair. Only full-duplex mode is supported. The bnx driver supports the following media options: full-duplex Force full duplex operation. half-duplex Force half duplex operation. For more information on configuring this device, see ifconfig(8).
SEE ALSO
arp(4), brgphy(4), ifmedia(4), intro(4), mii(4), netintro(4), pci(4), ifconfig(8)
HISTORY
The bnx device driver first appeared in NetBSD 4.0. NetBSD 5.0_RC4 December 17, 2006 NetBSD 5.0_RC4

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


Powered by man-cgi 1.15, Panagiotis Christias
Modified for NetBSD by Kimmo Suominen