AXE(4) NetBSD Kernel Interfaces Manual AXE(4)
axe -- ASIX Electronics AX88172/AX88178/AX88772 10/100/Gigabit USB Ether- net device
axe* at uhub? XXphy* at mii?
The axe driver supports the following adapters: Apple USB Ethernet Adapter A1277 ATEN UC-210T BAFO BF-320 Billionton Systems USB2AR Buffalo(MELCO) LUA-U2-GT Buffalo(MELCO) LUA-U2-KTX Corega FEther USB2-TX D-Link DUB-E100 Good Way GWUSB2E Hawking UF200 Intellinet USB 2.0 to Ethernet (rev A) IO-Data ETG-US2 JVC MP-PRX1 Konig CMP-NWUSB20 Level One USB-0200 Linksys USB200M Linksys USB1000 Logitec LAN-GTJ/U2 Netgear FA120 Nintendo Wii USB Lan Ethernet Adapter RVL-015 OQO model 01+ Ethernet Sitecom LN-029 SMC 2209USB/ETH SnapPort USB 2.0 LAN Adapter ST Lab USB 2.0 Fast Ethernet Surecom EP-1427X-2 System TALKS SGC-X2UL TRENDnet TU2-ET100 Z-TEK ZK-R01-2
The axe driver provides support for USB Ethernet adapters based on the ASIX Electronics AX88172, AX88178, and AX88772 USB 2.0 chipsets. The chip contains a 10/100 Ethernet MAC with MII interface and is designed to work with both Ethernet and HomePNA transceivers. The AX8172 and AX88772 contain 10/100 Ethernet MACs with MII interfaces. The AX8178 contains a 10/100/1000 Gigabit Ethernet MAC with a GMII/MII interface. The chip also supports USB 2.0, thereby accommodating 100 Mb/s data rates. The axe driver supports the following media types: autoselect Enable automatic selection of the media type and options. 10baseT/UTP Set 10Mbps operation. The mediaopt option can also be used to enable full-duplex operation. Not spec- ifying full duplex implies half-duplex mode. 100baseTX Set 100Mbps (fast Ethernet) operation. The mediaopt option can also be used to enable full-duplex operation. Not specifying full duplex implies half-duplex mode. 1000baseT Set 1000Mbps (Gigabit Ethernet) operation (AX88178 only). The axe driver supports the following media options: full-duplex Force full duplex operation. The interface will operate in half duplex mode if this media option is not specified. For more information on configuring this device, see ifconfig(8).
arp(4), ifmedia(4), netintro(4), usb(4), ifconfig(8) ASIX AX88172 data sheet, http://www.asix.com.tw.
The axe device driver first appeared in FreeBSD and was ported to NetBSD 3.0. It replaces the NetBSD uax driver. NetBSD 7.1.2 June 23, 2010 NetBSD 7.1.2
You can also request any man page by name and (optionally) by section: