WSS(4)                  NetBSD Kernel Interfaces Manual                 WSS(4)

NAME
     wss -- Windows Sound System hardware audio driver

SYNOPSIS
     wss0   at isa? port 0x530 irq 10 drq 0 drq2 1
     wss0   at isa? port 0x530 irq 10 drq 0 flags 1
     wss*   at acpi?
     wss*   at isapnp?
     wss*   at pnpbios? index ?
     audio* at audiobus?
     opl*   at wss?

DESCRIPTION
     The wss driver supports Microsoft's Windows Sound System, the MAD16 chip
     based hardware, and their clones.

     The base I/O port is set by a jumper on the board; valid choices are
     0x530, 0x604, 0xE80, or 0xF40.  Both IRQ and DMA channels are software
     programmable.  The IRQ may be set to 7, 9, 10, or 11, and the DMA channel
     may be set to 0, 1, or 3.

     The device flags must have bit 0 (value 1) set to enable the MAD16 sup-
     port.  This is to avoid potential conflicts with other devices when prob-
     ing the MAD16 because it requires use of extra I/O ports not in the base
     port range.  Chips needing this flag include the OPTi 82C928, 82C929,
     82C831, and the OAK OTI-601D.  Setting bit 1 (value 2) in flags disables
     the joystick port on MAD16 hardware.

SEE ALSO
     acpi(4), audio(4), isa(4), isapnp(4), joy(4), opl(4), pnpbios(4)

NetBSD 5.0.1                     June 22, 2005                    NetBSD 5.0.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen