USTIR(4)                NetBSD Kernel Interfaces Manual               USTIR(4)

NAME
     ustir -- SigmaTel STIr4200-based USB-IrDA bridge support

SYNOPSIS
     ustir*   at uhub?
     irframe* at ustir?

DESCRIPTION
     The ustir driver provides support for USB-IrDA bridges based on the Sig-
     maTel STIr4200.  The driver is known to work with the following adapters:

           Mars II 740 USB IrDA Adapter

     Access to the IrDA device is through the irframe(4) driver.

SEE ALSO
     irframe(4), uirda(4), usb(4)

HISTORY
     The ustir driver appeared in NetBSD 1.6.

AUTHORS
     The ustir driver was written by David Sainty <David.Sainty@dtsp.co.nz>.

BUGS
     The STIr4200 cannot notify the driver when it has received data, instead
     it has to be continuously polled.  This driver polls (when idle) at a
     fairly low rate of 10 times per second, which means that system perfor-
     mance is not overly affected by rapid polling, but latency is fairly
     high.

NetBSD 5.0.1                   December 24, 2001                  NetBSD 5.0.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen