USLSA(4)                NetBSD Kernel Interfaces Manual               USLSA(4)

NAME
     uslsa -- USB support for Silicon Labs CP210x series serial adapters

SYNOPSIS
     uslsa* at uhub?
     ucom*   at uslsa?

HARDWARE
     The uslsa driver is known to work with the following adapters:

           Siemens MC60 Data Cable
           Suunto USB Serial Adaptor
           Helicomm IP-Link 1220-DVM
           Nokia CA-42 USB

DESCRIPTION
     The uslsa driver provides support for the Silicon Labs USB-to-RS-232
     Bridge chip.

     The device is accessed through the ucom(4) driver which makes it behave
     like a tty(4).

SEE ALSO
     tty(4), ucom(4), usb(4)

     http://www.silabs.com.

HISTORY
     The uslsa driver appeared in NetBSD 4.0.

AUTHORS
     The uslsa driver was written by Jonathan A. Kollasch.  Code and style was
     borrowed from existing NetBSD USB-serial drivers.  Due to the unavail-
     ability of documentation, Craig Shelley's reverse-engineered Linux driver
     was used as documentation.

CAVEATS
     Hardware flow control may not work correctly.

     Settings other than 8 data bits, no parity, and 1 stop bit seem to be
     refused by the chip.

NetBSD 5.1                       May 12, 2006                       NetBSD 5.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen