TERMCAP(5)                NetBSD File Formats Manual                TERMCAP(5)

NAME
     termcap -- terminal capability data base

SYNOPSIS
     termcap

DESCRIPTION
     The termcap file is a database describing terminals, used, for example,
     by vi(1) and curses(3).  Terminals are described in termcap by giving a
     set of capabilities that they have and by describing how operations are
     performed.  Padding requirements and initialization sequences are
     included in termcap.

     Entries in termcap consist of a number of `:'-separated fields.  The
     first entry for each terminal gives the names that are known for the ter-
     minal, separated by `|' characters.  The first name given is the most
     common abbreviation for the terminal.  The last name given should be a
     long name fully identifying the terminal, and all others are understood
     as synonyms for the terminal name.  All names but the last should be in
     lower case and contain no blanks; the last name may well contain upper
     case characters and blanks for readability.

     Terminal names (except for the last, verbose entry) should be chosen
     using the following conventions.  The particular piece of hardware making
     up the terminal should have a root name chosen, thus ``hp2621'' This name
     should not contain hyphens.  Modes that the hardware can be in or user
     preferences should be indicated by appending a hyphen and an indicator of
     the mode.  Therefore, a ``vt100'' in 132-column mode would be
     ``vt100-w''.  The following suffixes should be used where possible:

           Suffix    Meaning                                       Example
           -w        Wide mode (more than 80 columns)              vt100-w
           -am       With automatic margins (usually default)      vt100-am
           -nam      Without automatic margins                     vt100-nam
           -n        Number of lines on screen                     aaa-60
           -na       No arrow keys (leave them in local)           concept100-na
           -np       Number of pages of memory                     concept100-4p
           -rv       Reverse video                                 concept100-rv

CAPABILITIES
     The characters in the Notes function field in the table have the follow-
     ing meanings (more than one may apply to a capability):

           N    indicates numeric parameter(s)
           P    indicates that padding may be specified
           *    indicates that padding may be based on the number of lines affected
           o    indicates capability is obsolete

     ``Obsolete'' capabilities have no terminfo equivalents, since they were
     considered useless, or are subsumed by other capabilities.  New software
     should not rely on them at all.

     Name      Type      Notes     Description
     functions
     !1        str                 Sent by shifted save key.
     !2        str                 Sent by shifted suspend key.
     !3        str                 Sent by shifted undo key.
     #1        str                 Sent by shifted help key.
     #2        str                 Sent by shifted home key.
     #3        str                 Sent by shifted input key.
     #4        str                 Sent by shifted left-arrow key.
     %0        str                 Sent by redo key.
     %1        str                 Sent by help key.
     %2        str                 Sent by mark key.
     %3        str                 Sent by message key.
     %4        str                 Sent by move key.
     %5        str                 Sent by next-object key.
     %6        str                 Sent by open key.
     %7        str                 Sent by options key.
     %8        str                 Sent by previous-object key.
     %9        str                 Sent by print or copy key.
     %a        str                 Sent by shifted message key.
     %b        str                 Sent by shifted move key.
     %c        str                 Sent by shifted next key.
     %d        str                 Sent by shifted options key.
     %e        str                 Sent by shifted prev key.
     %f        str                 Sent by shifted print key.
     %g        str                 Sent by shifted redo key.
     %h        str                 Sent by shifted replace key.
     %i        str                 Sent by shifted right-arrow key.
     %j        str                 Sent by shifted resume key.
     &0        str                 Sent by shifted cancel key.
     &1        str                 Sent by ref(erence) key.
     &2        str                 Sent by refresh key.
     &3        str                 Sent by replace key.
     &4        str                 Sent by restart key.
     &5        str                 Sent by resume key.
     &6        str                 Sent by save key.
     &7        str                 Sent by suspend key.
     &8        str                 Sent by undo key.
     &9        str                 Sent by shifted begin key.
     *0        str                 Sent by shifted find key.
     *1        str                 Sent by shifted command key.
     *2        str                 Sent by shifted copy key.
     *3        str                 Sent by shifted create key.
     *4        str                 Sent by shifted delete-character key.
     *5        str                 Sent by shifted delete-line key.
     *6        str                 Sent by shifted select key.
     *7        str                 Sent by shifted end key.
     *8        str                 Sent by shifted clear-to-end-of-line key.
     *9        str                 Sent by shifted exit key.
     @0        str                 Sent by find key.
     @1        str                 Sent by begin key.
     @2        str                 Sent by cancel key.
     @3        str                 Sent by close key.
     @4        str                 Sent by command key.
     @5        str                 Sent by copy key.
     @6        str                 Sent by create key.
     @7        str                 Sent by end key.
     @8        str                 Sent by enter key.
     @9        str                 Sent by exit key.
     AB        str                 Set background color to #1 using ANSI
                                   escape.
     ac        str                 Alternative (graphic) character set pairs.
     ae        str       (P)       End alternative character set.
     AL        str       (NP*)     Add" n new blank lines
     AF        str                 Set foreground color to #1 using ANSI
                                   escape.
     al        str       (P*)      Add new blank line.
     am        bool                Terminal has automatic margins.
     as        str       (P)       Start alternative character set.
     bc        str       (o)       Backspace if not ^H.
     bl        str       (P)       Audible signal (bell).
     bs        bool      (o)       Terminal can backspace with ^H.
     bt        str       (P)       Back tab.
     bw        bool                le (backspace) wraps from column 0 to last
                                   column.
     CC        str                 Terminal settable command character in
                                   prototype.
     cc        bool                Terminal can re-define existing color.
     cd        str       (P*)      Clear to end of display.
     ce        str       (P)       Clear to end of line.
     ch        str       (NP)      Set cursor column (horizontal position).
     cl        str       (P*)      Clear screen and home cursor.
     CM        str       (NP)      Memory-relative cursor addressing.
     cm        str       (NP)      Screen-relative cursor motion.
     Co        num                 Maximum number of colors on the screen.
     co        num                 Number of columns in a line (See BUGS sec-
                                   tion below).
     cr        str       (P)       Carriage return.
     cs        str       (NP)      Change scrolling region (VT100).
     ct        str       (P)       Clear all tab stops.
     cv        str       (NP)      Set cursor row (vertical position).
     da        bool                Display may be retained above the screen.
     dB        num       (o)       Milliseconds of bs delay needed (default
                                   0).
     db        bool                Display may be retained below the screen.
     DC        str       (NP*)     Delete n characters.
     dC        num       (o)       Milliseconds of cr delay needed (default
                                   0).
     dc        str       (P*)      Delete character.
     dF        num       (o)       Milliseconds of ff delay needed (default
                                   0).
     DL        str       (NP*)     Delete n lines.
     dl        str       (P*)      Delete line.
     dm        str                 Enter delete mode.
     dN        num       (o)       Milliseconds of nl delay needed (default
                                   0).
     DO        str       (NP*)     Move cursor down: n lines.
     do        str                 Down one line.
     ds        str                 Disable status line.
     dT        num       (o)       Milliseconds of horizontal tab delay needed
                                   (default 0).
     dV        num       (o)       Milliseconds of vertical tab delay needed
                                   (default 0).
     eA        str                 Enable alternate character set.
     ec        str       (NP)      Erase n characters.
     ed        str                 End delete mode.
     ei        str                 End insert mode.
     eo        bool                Can erase overstrikes with a blank.
     EP        bool      (o)       Even parity.
     es        bool                Escape can be used on the status line.
     F1-F9     str                 Sent by function keys 11-19.
     FA-FZ     str                 Sent by function keys 20-45.
     Fa-Fr     str                 Sent by function keys 46-63.
     ff        str       (P*)      Hardcopy terminal page eject.
     fs        str                 Return from status line.
     gn        bool                Generic line type, for example dialup,
                                   switch).
     hc        bool                Hardcopy terminal.
     HD        bool      (o)       Half-duplex.
     hd        str                 Half-line down (forward 1/2 linefeed).
     hl        bool                Terminal uses only HLS color notation
                                   (Tektronix).
     ho        str       (P)       Home cursor.
     hs        bool                Has extra ``status line''.
     hu        str                 Half-line up (reverse 1/2 linefeed).
     hz        bool                Cannot print ``~'' (Hazeltine).
     i1-i3     str                 Terminal initialization strings
                                   (terminfo(5) only)
     IC        str       (NP*)     Insert n blank characters.
     Ic        str                 Set color #1 to RGB #2, #3, #4.
     ic        str       (P*)      Insert character.
     if        str                 Name of file containing initialization
                                   string.
     im        str                 Enter insert mode.
     in        bool                Insert mode distinguishes nulls.
     Ip        str                 Set color-pair #1 to fg #2, bg #3.
     iP        str                 Pathname of program for initialization
                                   (terminfo(5) only).
     ip        str       (P*)      Insert pad after character inserted.
     is        str                 Terminal initialization string (termcap
                                   only).
     it        num                 Tabs initially every n positions.
     K1        str                 Sent by keypad upper left.
     K2        str                 Sent by keypad center.
     K3        str                 Sent by keypad upper right.
     K4        str                 Sent by keypad lower left.
     K5        str                 Sent by keypad lower right.
     k0-k9     str                 Sent by function keys 0-9.
     k;        str                 Sent by function key 10.
     kA        str                 Sent by insert-line key.
     ka        str                 Sent by clear-all-tabs key.
     kB        str                 Sent by back-tab key.
     kb        str                 Sent by backspace key.
     kC        str                 Sent by clear-screen or erase key.
     kD        str                 Sent by delete-character key.
     kd        str                 Sent by down-arrow key.
     kE        str                 Sent by clear-to-end-of-line key.
     ke        str                 Out of ``keypad transmit'' mode.
     kF        str                 Sent by scroll-forward/down key.
     kH        str                 Sent by home-down key.
     kh        str                 Sent by home key.
     kI        str                 Sent by insert-character or enter-insert-
                                   mode key.
     kL        str                 Sent by delete-line key.
     kl        str                 Sent by left-arrow key.
     kM        str                 Sent by insert key while in insert mode.
     Km        str                 Mouse event has occurred.
     km        bool                Has a ``meta'' key (shift, sets parity
                                   bit).
     kN        str                 Sent by next-page key.
     kn        num       (o)       Number of function (k0- k9) keys (default
                                   0).
     ko        str       (o)       Termcap entries for other non-function
                                   keys.
     kP        str                 Sent by previous-page key.
     kR        str                 Sent by scroll-backward/up key.
     kr        str                 Sent by right-arrow key.
     kS        str                 Sent by clear-to-end-of-screen key.
     ks        str                 Put terminal in ``keypad transmit'' mode.
     kT        str                 Sent by set-tab key.
     kt        str                 Sent by clear-tab key.
     ku        str                 Sent by up-arrow key.
     l0-l9     str                 Labels on function keys if not ``fn''.
     LC        bool      (o)       Lower-case only.
     LE        str       (NP)      Move cursor left n positions.
     le        str       (P)       Move cursor left one position.
     li        num                 Number of lines on screen or page (See BUGS
                                   section below)
     ll        str                 Last line, first column
     lm        num                 Lines of memory if > li (0 means varies).
     ma        str       (o)       Arrow key map (used by vi(1) version 2
                                   only).
     mb        str                 Turn on blinking attribute.
     md        str                 Turn on bold (extra bright) attribute.
     me        str                 Turn off all attributes.
     mh        str                 Turn on half-bright attribute.
     mi        bool                Safe to move while in insert mode.
     mk        str                 Turn on blank attribute (characters
                                   invisible).
     ml        str       (o)       Memory lock on above cursor.
     mm        str                 Turn on ``meta mode'' (8th bit).
     mo        str                 Turn off ``meta mode''.
     mp        str                 Turn on protected attribute.
     mr        str                 Turn on reverse-video attribute.
     ms        bool                Safe to move in standout modes.
     mu        str       (o)       Memory unlock (turn off memory lock).
     NC        num                 Video attributes that can't be used with
                                   colors
     nc        bool      (o)       No correctly-working cr (Datamedia 2500,
                                   Hazeltine 2000).
     nd        str                 Non-destructive space (cursor right).
     NL        bool      (o)       \n is newline, not line feed.
     nl        str       (o)       Newline character if not \n.
     ns        bool      (o)       Terminal is a CRT but doesn't scroll.
     nw        str       (P)       Newline (behaves like cr followed by do).
     OP        bool      (o)       Odd parity.
     oc        str                 Set all colors to the original ones.
     op        str                 Set default color-pair to the original one.
     os        bool                Terminal overstrikes.
     pa        num                 Maximum number of color-pairs on the
                                   screen.
     pb        num                 Lowest baud where delays are required.
     pc        str                 Pad character (default NUL).
     pf        str                 Turn off the printer.
     pk        str                 Program function key n to type string s
                                   (terminfo(5) only).
     pl        str                 Program function key n to execute string s
                                   (terminfo(5) only).
     pO        str       (N)       Turn on the printer for n bytes.
     po        str                 Turn on the printer.
     ps        str                 Print contents of the screen.
     pt        bool      (o)       Has hardware tabs (may need to be set with
                                   is).
     px        str                 Program function key n to transmit string s
                                   (terminfo(5) only).
     r1-r3     str                 Reset terminal completely to sane modes
                                   (terminfo(5) only).
     rc        str       (P)       Restore cursor to position of last sc.
     rf        str                 Name of file containing reset codes.
     RI        str       (NP)      Move cursor right n positions.
     rp        str       (NP*)     Repeat character c n times.
     rs        str                 Reset terminal completely to sane modes
                                   (termcap only).
     sa        str       (NP)      Define the video attributes.
     Sb        str                 Set background color to #1.
     sc        str       (P)       Save cursor position.
     se        str                 End standout mode.
     Sf        str                 Set foreground color to #1.
     SF        str       (NP*)     Scroll forward n lines.
     sf        str       (P)       Scroll text up.
     sg        num                 Number of garbage chars left by so or se
                                   (default 0).
     so        str                 Begin standout mode.
     SR        str       (NP*)     Scroll backward n lines.
     sr        str       (P)       Scroll text down.
     st        str                 Set a tab in all rows, current column.
     ta        str       (P)       Tab to next 8-position hardware tab stop.
     tc        str                 Entry of similar terminal - must be last.
     te        str                 String to end programs that use termcap.
     ti        str                 String to begin programs that use termcap.
     ts        str       (N)       Go to status line, column n.
     UC        bool      (o)       Upper-case only.
     uc        str                 Underscore one character and move past it.
     ue        str                 End underscore mode.
     ug        num                 Number of garbage chars left by us or ue
                                   (default 0).
     ul        bool                Underline character overstrikes.
     UP        str       (NP*)     Move cursor up n lines.
     up        str                 Upline (cursor up).
     us        str                 Start underscore mode.
     ut        bool                Screen erased with background color.
     vb        str                 Visible bell (must not move cursor).
     ve        str                 Make cursor appear normal (undo vs/ vi).
     vi        str                 Make cursor invisible.
     vs        str                 Make cursor very visible.
     vt        num                 Virtual terminal number (not supported on
                                   all systems).
     wi        str       (N)       Set current window.
     ws        num                 Number of columns in status line.
     xb        bool                Beehive (f1= ESC, f2=^C).
     xn        bool                Newline ignored after 80 cols (Concept).
     xo        bool                Terminal uses xoff/xon (DC3/DC1) handshak-
                                   ing.
     xr        bool      (o)       Return acts like ce cr nl (Delta Data).
     xs        bool                Standout not erased by overwriting
                                   (Hewlett-Packard).
     xt        bool                Tabs ruin, magic so char (Teleray 1061).
     xx        bool      (o)       Tektronix 4025 insert-line.
     ZZ        str                 Pointer to the extended termcap entry.  See
                                   tgetent(3) for details.

   A Sample Entry
     The following entry, which describes the Concept-100, is among the more
     complex entries in the termcap file as of this writing.

     ca|concept100|c100|concept|c104|concept100-4p|HDS Concept-100:\
             :al=3*\E^R:am:bl=^G:cd=16*\E^C:ce=16\E^U:cl=2*^L:cm=\Ea%+ %+ :\
             :co#80:.cr=9^M:db:dc=16\E^A:dl=3*\E^B:do=^J:ei=\E\200:eo:im=\E^P:in:\
             :ip=16*:is=\EU\Ef\E7\E5\E8\El\ENH\EK\E\200\Eo&\200\Eo\47\E:k1=\E5:\
             :k2=\E6:k3=\E7:kb=^h:kd=\E<:ke=\Ex:kh=\E?:kl=\E>:kr=\E=:ks=\EX:\
             :ku=\E;:le=^H:li#24:mb=\EC:me=\EN\200:mh=\EE:mi:mk=\EH:mp=\EI:\
             :mr=\ED:nd=\E=:pb#9600:rp=0.2*\Er%.%+ :se=\Ed\Ee:sf=^J:so=\EE\ED:\
             :.ta=8\t:te=\Ev    \200\200\200\200\200\200\Ep\r\n:\
             :ti=\EU\Ev  8p\Ep\r:ue=\Eg:ul:up=\E;:us=\EG:\
             :vb=\Ek\200\200\200\200\200\200\200\200\200\200\200\200\200\200\EK:\
             :ve=\Ew:vs=\EW:vt#8:xn:\
             :bs:cr=^M:dC#9:dT#8:nl=^J:ta=^I:pt:

     Entries may continue onto multiple lines by giving a \ as the last char-
     acter of a line, and empty fields may be included for readability (here
     between the last field on a line and the first field on the next).  Com-
     ments may be included on lines beginning with ``#''.

   Types of Capabilities
     Capabilities in termcap are of three types: Boolean capabilities, which
     indicate particular features that the terminal has; numeric capabilities,
     giving the size of the display or the size of other attributes; and
     string capabilities, which give character sequences that can be used to
     perform particular terminal operations.  All capabilities have two-letter
     codes.  For instance, the fact that the Concept has automatic margins (an
     automatic return and linefeed when the end of a line is reached) is indi-
     cated by the Boolean capability am.  Hence the description of the Concept
     includes am.

     Numeric capabilities are followed by the character `#' then the value.
     In the example above co, which indicates the number of columns the dis-
     play has, gives the value `80' for the Concept.

     Finally, string-valued capabilities, such as ce (clear-to-end-of-line
     sequence) are given by the two-letter code, an `=', then a string ending
     at the next following `:'.  A delay in milliseconds may appear after the
     `=' in such a capability, which causes padding characters to be supplied
     by tputs(3) after the remainder of the string is sent to provide this
     delay.  The delay can be either a number, such as `20', or a number fol-
     lowed by an `*', such as `3*'.  An `*' indicates that the padding
     required is proportional to the number of lines affected by the opera-
     tion, and the amount given is the per-affected-line padding required.
     (In the case of insert-character, the factor is still the number of lines
     affected; this is always 1 unless the terminal has in and the software
     uses it.)  When an `*' is specified, it is sometimes useful to give a
     delay of the form `3.5' to specify a delay per line to tenths of mil-
     liseconds.  (Only one decimal place is allowed.)

     A number of escape sequences are provided in the string-valued capabili-
     ties for easy encoding of control characters there.  \E maps to an ESC
     character, ^X maps to a control-X for any appropriate X, and the
     sequences \n \r \t \b \f map to linefeed, return, tab, backspace, and
     formfeed, respectively.  Finally, characters may be given as three octal
     digits after a \, and the characters ^ and \ may be given as \^ and \\.
     If it is necessary to place a : in a capability it must be escaped in
     octal as \072.  If it is necessary to place a NUL character in a string
     capability it must be encoded as \200.  (The routines that deal with
     termcap use C strings and strip the high bits of the output very late, so
     that a \200 comes out as a \000 would.)

     Sometimes individual capabilities must be commented out.  To do this, put
     a period before the capability name.  For example, see the first cr and
     ta in the example above.

   Preparing Descriptions
     The most effective way to prepare a terminal description is by imitating
     the description of a similar terminal in termcap and to build up a
     description gradually, using partial descriptions with vi(1) to check
     that they are correct.  Be aware that a very unusual terminal may expose
     deficiencies in the ability of the termcap file to describe it or bugs in
     vi(1).  To easily test a new terminal description you are working on you
     can put it in your home directory in a file called .termcap and programs
     will look there before looking in /usr/share/misc/termcap.  You can also
     set the environment variable TERMPATH to a list of absolute file path-
     names (separated by spaces or colons), one of which contains the descrip-
     tion you are working on, and programs will search them in the order
     listed, and nowhere else.  See termcap(3).  The TERMCAP environment vari-
     able is usually set to the termcap entry itself to avoid reading files
     when starting up a program.

     To get the padding for insert-line right (if the terminal manufacturer
     did not document it), a severe test is to use vi(1) to edit /etc/passwd
     at 9600 baud, delete roughly 16 lines from the middle of the screen, then
     hit the `u' key several times quickly.  If the display messes up, more
     padding is usually needed.  A similar test can be used for insert-charac-
     ter.

   Basic Capabilities
     The number of columns on each line of the display is given by the co
     numeric capability.  If the display is a CRT, then the number of lines on
     the screen is given by the li capability.  If the display wraps around to
     the beginning of the next line when the cursor reaches the right margin,
     then it should have the am capability.  If the terminal can clear its
     screen, the code to do this is given by the cl string capability.  If the
     terminal overstrikes (rather than clearing the position when a character
     is overwritten), it should have the os capability.  If the terminal is a
     printing terminal, with no soft copy unit, give it both hc and os.  (os
     applies to storage scope terminals, such as the Tektronix 4010 series, as
     well as to hard copy and APL terminals.)  If there is a code to move the
     cursor to the left edge of the current row, give this as cr.  (Normally
     this will be carriage-return, ^M.)  If there is a code to produce an
     audible signal (bell, beep, etc.), give this as bl.

     If there is a code (such as backspace) to move the cursor one position to
     the left, that capability should be given as le.  Similarly, codes to
     move to the right, up, and down should be given as nd, up, and do,
     respectively.  These local cursor motions should not alter the text they
     pass over; for example, you would not normally use ``nd= '' unless the
     terminal has the os capability, because the space would erase the charac-
     ter moved over.

     A very important point here is that the local cursor motions encoded in
     termcap have undefined behavior at the left and top edges of a CRT dis-
     play.  Programs should never attempt to backspace around the left edge,
     unless bw is given, and never attempt to go up off the top using local
     cursor motions.

     In order to scroll text up, a program goes to the bottom left corner of
     the screen and sends the sf (index) string.  To scroll text down, a pro-
     gram goes to the top left corner of the screen and sends the sr (reverse
     index) string.  The strings sf and sr have undefined behavior when not on
     their respective corners of the screen.  Parameterized versions of the
     scrolling sequences are SF and SR, which have the same semantics as sf
     and sr except that they take one parameter and scroll that many lines.
     They also have undefined behavior except at the appropriate corner of the
     screen.

     The am capability tells whether the cursor sticks at the right edge of
     the screen when text is output there, but this does not necessarily apply
     to nd from the last column.  Leftward local motion is defined from the
     left edge only when bw is given; then an le from the left edge will move
     to the right edge of the previous row.  This is useful for drawing a box
     around the edge of the screen, for example.  If the terminal has switch-
     selectable automatic margins, the termcap description usually assumes
     that this feature is on, i.e., am.  If the terminal has a command that
     moves to the first column of the next line, that command can be given as
     nw (newline).  It is permissible for this to clear the remainder of the
     current line, so if the terminal has no correctly-working CR and LF it
     may still be possible to craft a working nw out of one or both of them.

     These capabilities suffice to describe hardcopy and ``glass-tty'' termi-
     nals.  Thus the Teletype model 33 is described as

           T3|tty33|33|tty|Teletype model 33:\
                   :bl=^G:co#72:cr=^M:do=^J:hc:os:

     and the Lear Siegler ADM-3 is described as

           l3|adm3|3|LSI ADM-3:\
           :am:bl=^G:cl=^Z:co#80:cr=^M:do=^J:le=^H:li#24:sf=^J:

   Parameterized Strings
     Cursor addressing and other strings requiring parameters are described by
     a parameterized string capability, with printf(3)-like escapes %x in it,
     while other characters are passed through unchanged.  For example, to
     address the cursor the cm capability is given, using two parameters: the
     row and column to move to.  (Rows and columns are numbered from zero and
     refer to the physical screen visible to the user, not to any unseen mem-
     ory.  If the terminal has memory-relative cursor addressing, that can be
     indicated by an analogous CM capability.)

     The % encodings have the following meanings:

     %%       output `%'
     %d       output value as in printf(3) %d
     %2       output value as in printf(3) %2d
     %3       output value as in printf(3) %3d
     %.       output value as in printf(3) %c
     %+x      add x to value, then do %.
     %>xy     if value > x then add y, no output
     %r       reverse order of two parameters, no output
     %i       increment by one, no output
     %n       exclusive-or all parameters with 0140 (Datamedia 2500)
     %B       BCD (16*(value/10)) + (value%10), no output
     %D       Reverse coding (value - 2*(value%16)), no output (Delta Data).

     Consider the Hewlett-Packard 2645, which, to get to row 3 and column 12,
     needs to be sent ``\E&a12c03Y'' padded for 6 milliseconds.  Note that the
     order of the row and column coordinates is reversed here and that the row
     and column are sent as two-digit integers.  Thus its cm capability is
     ``cm=6\E&%r%2c%2Y''.

     The Datamedia 2500 needs the current row and column sent encoded in
     binary using ``%.''.  Terminals that use ``%.'' need to be able to
     backspace the cursor (le) and to move the cursor up one line on the
     screen (up).  This is necessary because it is not always safe to transmit
     \n, ^D, and \r, as the system may change or discard them.  (Programs
     using termcap must set terminal modes so that tabs are not expanded, so
     \t is safe to send.  This turns out to be essential for the Ann Arbor
     4080.)

     A final example is the Lear Siegler ADM-3a, which offsets row and column
     by a blank character, thus ``cm=\E=%+ %+ ''.

     Row or column absolute cursor addressing can be given as single parameter
     capabilities ch (horizontal position absolute) and cv (vertical position
     absolute).  Sometimes these are shorter than the more general two-parame-
     ter sequence (as with the Hewlett-Packard 2645) and can be used in pref-
     erence to cm.  If there are parameterized local motions (e.g., move n
     positions to the right) these can be given as DO, LE, RI, and UP with a
     single parameter indicating how many positions to move.  These are pri-
     marily useful if the terminal does not have cm, such as the Tektronix
     4025.

   Cursor Motions
     If the terminal has a fast way to home the cursor (to the very upper left
     corner of the screen), this can be given as ho.  Similarly, a fast way of
     getting to the lower left-hand corner can be given as ll; this may
     involve going up with up from the home position, but a program should
     never do this itself (unless ll does), because it can make no assumption
     about the effect of moving up from the home position.  Note that the home
     position is the same as cursor address (0,0): to the top left corner of
     the screen, not of memory.  (Therefore, the ``\EH'' sequence on Hewlett-
     Packard terminals cannot be used for ho.)

   Area Clears
     If the terminal can clear from the current position to the end of the
     line, leaving the cursor where it is, this should be given as ce.  If the
     terminal can clear from the current position to the end of the display,
     this should be given as cd.  cd must only be invoked from the first col-
     umn of a line.  (Therefore, it can be simulated by a request to delete a
     large number of lines, if a true cd is not available.)

   Insert/Delete Line
     If the terminal can open a new blank line before the line containing the
     cursor, this should be given as al; this must be invoked only from the
     first position of a line.  The cursor must then appear at the left of the
     newly blank line.  If the terminal can delete the line that the cursor is
     on, this should be given as dl; this must only be used from the first
     position on the line to be deleted.  Versions of al and dl which take a
     single parameter and insert or delete that many lines can be given as AL
     and DL.  If the terminal has a settable scrolling region (like the
     VT100), the command to set this can be described with the cs capability,
     which takes two parameters: the top and bottom lines of the scrolling
     region.  The cursor position is, alas, undefined after using this com-
     mand.  It is possible to get the effect of insert or delete line using
     this command -- the sc and rc (save and restore cursor) commands are also
     useful.  Inserting lines at the top or bottom of the screen can also be
     done using sr or sf on many terminals without a true insert/delete line,
     and is often faster even on terminals with those features.

     If the terminal has the ability to define a window as part of memory
     which all commands affect, it should be given as the parameterized string
     wi.  The four parameters are the starting and ending lines in memory and
     the starting and ending columns in memory, in that order.  (This
     terminfo(5) capability is described for completeness.  It is unlikely
     that any termcap-using program will support it.)

     If the terminal can retain display memory above the screen, then the da
     capability should be given; if display memory can be retained below, then
     db should be given.  These indicate that deleting a line or scrolling may
     bring non-blank lines up from below or that scrolling back with sr may
     bring down non-blank lines.

   Insert/Delete Character
     There are two basic kinds of intelligent terminals with respect to
     insert/delete character that can be described using termcap.  The most
     common insert/delete character operations affect only the characters on
     the current line and shift characters off the end of the line rigidly.
     Other terminals, such as the Concept-100 and the Perkin Elmer Owl, make a
     distinction between typed and untyped blanks on the screen, shifting upon
     an insert or delete only to an untyped blank on the screen which is
     either eliminated or expanded to two untyped blanks.  You can determine
     the kind of terminal you have by clearing the screen then typing text
     separated by cursor motions.  Type ``abc    def'' using local cursor
     motions (not spaces) between the ``abc'' and the ``def''.  Then position
     the cursor before the ``abc'' and put the terminal in insert mode.  If
     typing characters causes the rest of the line to shift rigidly and char-
     acters to fall off the end, then your terminal does not distinguish
     between blanks and untyped positions.  If the ``abc'' shifts over to the
     ``def'' which then move together around the end of the current line and
     onto the next as you insert, then you have the second type of terminal
     and should give the capability in, which stands for ``insert null''.
     While these are two logically separate attributes (one-line vs. multi-
     line insert mode, and special treatment of untyped spaces), we have seen
     no terminals whose insert mode cannot be described with the single
     attribute.

     termcap can describe both terminals that have an insert mode and termi-
     nals that send a simple sequence to open a blank position on the current
     line.  Give as im the sequence to get into insert mode.  Give as ei the
     sequence to leave insert mode.  Now give as ic any sequence that needs to
     be sent just before each character to be inserted.  Most terminals with a
     true insert mode will not give ic; terminals that use a sequence to open
     a screen position should give it here.  (If your terminal has both,
     insert mode is usually preferable to ic.  Do not give both unless the
     terminal actually requires both to be used in combination.)  If post-
     insert padding is needed, give this as a number of milliseconds in ip (a
     string option).  Any other sequence that may need to be sent after inser-
     tion of a single character can also be given in ip.  If your terminal
     needs to be placed into an `insert mode' and needs a special code preced-
     ing each inserted character, then both im/ ei and ic can be given, and
     both will be used.  The IC capability, with one parameter n, will repeat
     the effects of ic n times.

     It is occasionally necessary to move around while in insert mode to
     delete characters on the same line (e.g., if there is a tab after the
     insertion position).  If your terminal allows motion while in insert
     mode, you can give the capability mi to speed up inserting in this case.
     Omitting mi will affect only speed.  Some terminals (notably Datamedia's)
     must not have mi because of the way their insert mode works.

     Finally, you can specify dc to delete a single character, DC with one
     parameter n to delete n characters, and delete mode by giving dm and ed
     to enter and exit delete mode (which is any mode the terminal needs to be
     placed in for dc to work).

   Highlighting, Underlining, and Visible Bells
     If your terminal has one or more kinds of display attributes, these can
     be represented in a number of different ways.  You should choose one dis-
     play form as standout mode, representing a good high-contrast, easy-on-
     the-eyes format for highlighting error messages and other attention get-
     ters.  (If you have a choice, reverse video plus half-bright is good, or
     reverse video alone.)  The sequences to enter and exit standout mode are
     given as so and se, respectively.  If the code to change into or out of
     standout mode leaves one or even two blank spaces or garbage characters
     on the screen, as the TVI 912 and Teleray 1061 do, then sg should be
     given to tell how many characters are left.

     Codes to begin underlining and end underlining can be given as us and ue,
     respectively.  Underline mode change garbage is specified by ug, similar
     to sg.  If the terminal has a code to underline the current character and
     move the cursor one position to the right, such as the Microterm Mime,
     this can be given as uc.

     Other capabilities to enter various highlighting modes include mb (blink-
     ing), md (bold or extra bright), mh (dim or half-bright), mk (blanking or
     invisible text), mp (protected), mr (reverse video), me (turn off all
     attribute modes), as (enter alternative character set mode), and ae (exit
     alternative character set mode).  Turning on any of these modes singly
     may or may not turn off other modes.

     If there is a sequence to set arbitrary combinations of mode, this should
     be given as sa (set attributes), taking 9 parameters.  Each parameter is
     either 0 or 1, as the corresponding attributes is on or off.  The 9
     parameters are, in order: standout, underline, reverse, blink, dim, bold,
     blank, protect, and alternative character set.  Not all modes need be
     supported by sa, only those for which corresponding attribute commands
     exist.  (It is unlikely that a termcap-using program will support this
     capability, which is defined for compatibility with terminfo(5)).

     Terminals with the ``magic cookie'' glitches (sg and ug), rather than
     maintaining extra attribute bits for each character cell, instead deposit
     special ``cookies'', or ``garbage characters'', when they receive mode-
     setting sequences, which affect the display algorithm.

     Some terminals, such as the Hewlett-Packard 2621, automatically leave
     standout mode when they move to a new line or when the cursor is
     addressed.  Programs using standout mode should exit standout mode on
     such terminals before moving the cursor or sending a newline.  On termi-
     nals where this is not a problem, the ms capability should be present to
     say that this overhead is unnecessary.

     If the terminal has a way of flashing the screen to indicate an error
     quietly (a bell replacement), this can be given as vb; it must not move
     the cursor.

     If the cursor needs to be made more visible than normal when it is not on
     the bottom line (to change, for example, a non-blinking underline into an
     easier-to-find block or blinking underline), give this sequence as vs.
     If there is a way to make the cursor completely invisible, give that as
     vi.  The capability ve, which undoes the effects of both of these modes,
     should also be given.

     If your terminal correctly displays underlined characters (with no spe-
     cial codes needed) even though it does not overstrike, then you should
     give the capability ul.  If overstrikes are erasable with a blank, this
     should be indicated by giving eo.

   Keypad
     If the terminal has a keypad that transmits codes when the keys are
     pressed, this information can be given.  Note that it is not possible to
     handle terminals where the keypad only works in local mode (this applies,
     for example, to the unshifted Hewlett-Packard 2621 keys).  If the keypad
     can be set to transmit or not transmit, give these codes as ks and ke.
     Otherwise the keypad is assumed to always transmit.  The codes sent by
     the left-arrow, right-arrow, up-arrow, down-arrow, and home keys can be
     given as kl, kr, ku, kd, and kh, respectively.  If there are function
     keys such as f0, f1, ..., f9, the codes they send can be given as k0, k1,
     k9.  If these keys have labels other than the default f0 through f9, the
     labels can be given as l0, l1, l9.  The codes transmitted by certain
     other special keys can be given: kH (home down), kb (backspace), ka
     (clear all tabs), kt (clear the tab stop in this column), kC (clear
     screen or erase), kD (delete character), kL (delete line), kM (exit
     insert mode), kE (clear to end of line), kS (clear to end of screen), kI
     (insert character or enter insert mode), kA (insert line), kN (next
     page), kP (previous page), kF (scroll forward/down), kR (scroll back-
     ward/up), and kT (set a tab stop in this column).  In addition, if the
     keypad has a 3 by 3 array of keys including the four arrow keys, then the
     other five keys can be given as K1, K2, K3, K4, and K5.  These keys are
     useful when the effects of a 3 by 3 directional pad are needed.  The
     obsolete ko capability formerly used to describe ``other'' function keys
     has been completely supplanted by the above capabilities.

     The ma entry is also used to indicate arrow keys on terminals that have
     single-character arrow keys.  It is obsolete but still in use in version
     2 of vi which must be run on some minicomputers due to memory limita-
     tions.  This field is redundant with kl, kr, ku, kd, and kh.  It consists
     of groups of two characters.  In each group, the first character is what
     an arrow key sends, and the second character is the corresponding vi com-
     mand.  These commands are h for kl, j for kd, k for ku, l for kr, and H
     for kh.  For example, the Mime would have ``ma=^Hh^Kj^Zk^Xl'' indicating
     arrow keys left (^H), down (^K), up (^Z), and right (^X).  (There is no
     home key on the Mime.)

   Tabs and Initialization
     If the terminal needs to be in a special mode when running a program that
     uses these capabilities, the codes to enter and exit this mode can be
     given as ti and te.  This arises, for example, from terminals like the
     Concept with more than one page of memory.  If the terminal has only mem-
     ory-relative cursor addressing and not screen-relative cursor addressing,
     a screen-sized window must be fixed into the display for cursor address-
     ing to work properly.  This is also used for the Tektronix 4025, where ti
     sets the command character to be the one used by termcap.

     Other capabilities include is, an initialization string for the terminal,
     and if, the name of a file containing long initialization strings.  These
     strings are expected to set the terminal into modes consistent with the
     rest of the termcap description.  They are normally sent to the terminal
     by the tset(1) program each time the user logs in.  They will be printed
     in the following order: is; setting tabs using ct and st; and finally if.
     (terminfo(5) uses i1-i2 instead of is and runs the program iP and prints
     i3 after the other initializations.)  A pair of sequences that does a
     harder reset from a totally unknown state can be analogously given as rs
     and if.  These strings are output by the reset(1) program, which is used
     when the terminal gets into a wedged state.  (terminfo(5) uses r1-r3
     instead of rs.)  Commands are normally placed in rs and rf only if they
     produce annoying effects on the screen and are not necessary when logging
     in.  For example, the command to set the VT100 into 80-column mode would
     normally be part of is, but it causes an annoying glitch of the screen
     and is not normally needed since the terminal is usually already in
     80-column mode.

     If the terminal has hardware tabs, the command to advance to the next tab
     stop can be given as ta (usually ^I).  A ``backtab'' command which moves
     leftward to the previous tab stop can be given as bt.  By convention, if
     the terminal driver modes indicate that tab stops are being expanded by
     the computer rather than being sent to the terminal, programs should not
     use ta or bt even if they are present, since the user may not have the
     tab stops properly set.  If the terminal has hardware tabs that are ini-
     tially set every n positions when the terminal is powered up, then the
     numeric parameter it is given, showing the number of positions between
     tab stops.  This is normally used by the tset(1) command to determine
     whether to set the driver mode for hardware tab expansion, and whether to
     set the tab stops.  If the terminal has tab stops that can be saved in
     nonvolatile memory, the termcap description can assume that they are
     properly set.

     If there are commands to set and clear tab stops, they can be given as ct
     (clear all tab stops) and st (set a tab stop in the current column of
     every row).  If a more complex sequence is needed to set the tabs than
     can be described by this, the sequence can be placed in is or if.

   Delays
     Certain capabilities control padding in the terminal driver.  These are
     primarily needed by hardcopy terminals and are used by the tset(1) pro-
     gram to set terminal driver modes appropriately.  Delays embedded in the
     capabilities cr, sf, le, ff, and ta will cause the appropriate delay bits
     to be set in the terminal driver.  If pb (padding baud rate) is given,
     these values can be ignored at baud rates below the value of pb.  For
     4.2BSD tset(1), the delays are given as numeric capabilities dC, dN, dB,
     dF, and dT instead.

   Miscellaneous
     If the terminal requires other than a NUL (zero) character as a pad, this
     can be given as pc.  Only the first character of the pc string is used.

     If the terminal has commands to save and restore the position of the cur-
     sor, give them as sc and rc.

     If the terminal has an extra ``status line'' that is not normally used by
     software, this fact can be indicated.  If the status line is viewed as an
     extra line below the bottom line, then the capability hs should be given.
     Special strings to go to a position in the status line and to return from
     the status line can be given as ts and fs.  (fs must leave the cursor
     position in the same place that it was before ts.  If necessary, the sc
     and rc strings can be included in ts and fs to get this effect.)  The
     capability ts takes one parameter, which is the column number of the sta-
     tus line to which the cursor is to be moved.  If escape sequences and
     other special commands such as tab work while in the status line, the
     flag es can be given.  A string that turns off the status line (or other-
     wise erases its contents) should be given as ds.  The status line is nor-
     mally assumed to be the same width as the rest of the screen, i.e., co.
     If the status line is a different width (possibly because the terminal
     does not allow an entire line to be loaded), then its width in columns
     can be indicated with the numeric parameter ws.

     If the terminal can move up or down half a line, this can be indicated
     with hu (half-line up) and hd (half-line down).  This is primarily useful
     for superscripts and subscripts on hardcopy terminals.  If a hardcopy
     terminal can eject to the next page (form feed), give this as ff (usually
     ^L).

     If there is a command to repeat a given character a given number of times
     (to save time transmitting a large number of identical characters), this
     can be indicated with the parameterized string rp.  The first parameter
     is the character to be repeated and the second is the number of times to
     repeat it.  (This is a terminfo(5) feature that is unlikely to be sup-
     ported by a program that uses termcap.)

     If the terminal has a settable command character, such as the Tektronix
     4025, this can be indicated with CC.  A prototype command character is
     chosen which is used in all capabilities.  This character is given in the
     CC capability to identify it.  The following convention is supported on
     some UNIX systems: The environment is to be searched for a CC variable,
     and if found, all occurrences of the prototype character are replaced by
     the character in the environment variable.  This use of the CC environ-
     ment variable is a very bad idea, as it conflicts with make(1).

     Terminal descriptions that do not represent a specific kind of known ter-
     minal, such as switch, dialup, patch, and network, should include the gn
     (generic) capability so that programs can complain that they do not know
     how to talk to the terminal.  (This capability does not apply to virtual
     terminal descriptions for which the escape sequences are known.)

     If the terminal uses xoff/xon (DC3/DC1) handshaking for flow control,
     give xo.  Padding information should still be included so that routines
     can make better decisions about costs, but actual pad characters will not
     be transmitted.

     If the terminal has a ``meta key'' which acts as a shift key, setting the
     8th bit of any character transmitted, then this fact can be indicated
     with km.  Otherwise, software will assume that the 8th bit is parity and
     it will usually be cleared.  If strings exist to turn this ``meta mode''
     on and off, they can be given as mm and mo.

     If the terminal has more lines of memory than will fit on the screen at
     once, the number of lines of memory can be indicated with lm.  An
     explicit value of 0 indicates that the number of lines is not fixed, but
     that there is still more memory than fits on the screen.

     If the terminal is one of those supported by the UNIX system virtual ter-
     minal protocol, the terminal number can be given as vt.

     Media copy strings which control an auxiliary printer connected to the
     terminal can be given as ps: print the contents of the screen; pf: turn
     off the printer; and po: turn on the printer.  When the printer is on,
     all text sent to the terminal will be sent to the printer.  It is unde-
     fined whether the text is also displayed on the terminal screen when the
     printer is on.  A variation pO takes one parameter and leaves the printer
     on for as many characters as the value of the parameter, then turns the
     printer off.  The parameter should not exceed 255.  All text, including
     pf, is transparently passed to the printer while pO is in effect.

     Strings to program function keys can be given as pk, pl, and px.  Each of
     these strings takes two parameters: the function key number to program
     (from 0 to 9) and the string to program it with.  Function key numbers
     out of this range may program undefined keys in a terminal-dependent man-
     ner.  The differences among the capabilities are that pk causes pressing
     the given key to be the same as the user typing the given string; pl
     causes the string to be executed by the terminal in local mode; and px
     causes the string to be transmitted to the computer.  Unfortunately, due
     to lack of a definition for string parameters in termcap, only
     terminfo(5) supports these capabilities.  The ZZ capability is automati-
     cally generated in the tgetent call and must never be defined in termcap
     entries.

   Glitches and Braindamage
     Hazeltine terminals, which do not allow `~' characters to be displayed,
     should indicate hz.

     The nc capability, now obsolete, formerly indicated Datamedia terminals,
     which echo \r \n for carriage return then ignore a following linefeed.

     Terminals that ignore a linefeed immediately after an am wrap, such as
     the Concept, should indicate xn.

     If ce is required to get rid of standout (instead of merely writing nor-
     mal text on top of it), xs should be given.

     Teleray terminals, where tabs turn all characters moved over to blanks,
     should indicate xt (destructive tabs).  This glitch is also taken to mean
     that it is not possible to position the cursor on top of a magic cookie,
     and that to erase standout mode it is necessary to use delete and insert
     line.

     The Beehive Superbee, which is unable to correctly transmit the ESC or ^C
     characters, has xb, indicating that the ``f1'' key is used for ESC and
     ``f2'' for ^C.  (Only certain Superbees have this problem, depending on
     the ROM.)

     Other specific terminal problems may be corrected by adding more capabil-
     ities of the form x x.

   Similar Terminals
     If there are two very similar terminals, one can be defined as being just
     like the other with certain exceptions.  The string capability tc can be
     given with the name of the similar terminal.  This capability must be
     last.  The capabilities given before tc override those in the terminal
     type invoked by tc.  A capability can be canceled by placing xx@ to the
     left of the tc invocation, where xx is the capability.  For example, the
     entry

           hn|2621-nl:ks@:ke@:tc=2621:

     defines a ``2621-nl'' that does not have the ks or ke capabilities, hence
     does not turn on the function key labels when in visual mode.  This is
     useful for different modes for a terminal, or for different user prefer-
     ences.

FILES
     /usr/share/misc/termcap     File containing terminal descriptions.
     /usr/share/misc/termcap.db  Hash database file containing terminal
                                 descriptions (see cap_mkdb(1)).

SEE ALSO
     cap_mkdb(1), ex(1), more(1), tset(1), ul(1), vi(1), curses(3), printf(3),
     termcap(3)

HISTORY
     The termcap file format appeared in 3BSD.

BUGS
     Note: The termcap functions were replaced by terminfo(5) in AT&T System V
     UNIX Release 2.0.  The transition will be relatively painless if capabil-
     ities flagged as ``obsolete'' are avoided.

     Lines and columns are now stored by the kernel as well as in the termcap
     entry.  Most programs now use the kernel information primarily; the
     information in this file is used only if the kernel does not have any
     information.

     Not all programs support all entries.

NetBSD 5.1                     January 27, 2003                     NetBSD 5.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen