SIISATA(4)              NetBSD Kernel Interfaces Manual             SIISATA(4)

NAME
     siisata -- Silicon Image SATA-II controllers driver

SYNOPSIS
     siisata* at pci? dev ? function ?
     siisata* at cardbus? function ?

DESCRIPTION
     The siisata driver supports the Silicon Image SteelVine family of SATA-II
     controllers, interfacing the hardware with the ata(4) and atapi(4) sub-
     systems.

     The following controllers are supported by the siisata driver:

           Silicon Image SiI3124 4-port PCI/PCI-X
           Silicon Image SiI3132 2-port PCI-Express x1
           Silicon Image SiI3531 1-port PCI-Express x1

SEE ALSO
     ata(4), atapi(4), cardbus(4), pci(4), wd(4)

HISTORY
     The siisata driver first appeared in NetBSD 5.0.

AUTHORS
     The siisata driver was written by Jonathan A. Kollasch
     <jakllsch@kollasch.net>.

BUGS
     SATA Native Command Queuing is not yet supported.
     Device hot swapping is not yet supported.
     Silicon Image's Software RAID is not yet supported by the
             ataraid(4) driver.  raid(4) can be used instead.

NetBSD 6.1.3                     July 19, 2009                    NetBSD 6.1.3

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen