SF(4)                   NetBSD Kernel Interfaces Manual                  SF(4)

NAME
     sf -- Adaptec AIC-6915 10/100 Ethernet driver

SYNOPSIS
     sf* at pci? dev ? function ?

     Configuration of PHYs may also be necessary.  See mii(4).

DESCRIPTION
     The sf device driver supports the Adaptec AIC-6915 10/100 Ethernet chip.
     This chip is found on several Adaptec Ethernet boards:

              ANA-62011 Single port 10/100 64-bit

              ANA-62022 Dual port 10/100 64-bit

              ANA-62044 Quad port 10/100 64-bit

              ANA-62020 Single port 100BASE-FX 64-bit

              ANA-69011 Single port 10/100 32-bit

SEE ALSO
     arp(4), ifmedia(4), mii(4), netintro(4), pci(4), ifconfig(8)

HISTORY
     The sf driver first appeared in NetBSD 1.6.

AUTHORS
     The sf driver was written by Jason R. Thorpe <thorpej@NetBSD.org>.

BUGS
     The sf driver does not support the IPv4/TCP/UDP checksum function of the
     AIC-6915.

     The sf driver does not support the VLAN function of the AIC-6915.

NetBSD 7.0                       June 18, 2001                      NetBSD 7.0

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen