SATALINK(4)             NetBSD Kernel Interfaces Manual            SATALINK(4)

NAME
     satalink -- Silicon Image SATALink disk controller driver

SYNOPSIS
     satalink* at pci? dev ? function ? flags 0x0000

DESCRIPTION
     The satalink driver supports the Silicon Image SATALink 3112 2-port and
     3114 4-port Serial ATA controllers, and provides the interface with the
     hardware for the ata(4) driver.

     The 0x0002 flag forces the satalink driver to disable DMA on chipsets for
     which DMA would normally be enabled.  This can be used as a debugging
     aid, or to work around problems where the SATA controller is wired up to
     the system incorrectly.

SEE ALSO
     ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)

NetBSD 5.1                     December 19, 2003                    NetBSD 5.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen