OQMGR(8)                                                              OQMGR(8)



NAME
       oqmgr - old Postfix queue manager

SYNOPSIS
       oqmgr [generic Postfix daemon options]

DESCRIPTION
       The  oqmgr(8)  daemon  awaits the arrival of incoming mail and arranges
       for its delivery via Postfix delivery processes.  The actual mail rout-
       ing  strategy is delegated to the trivial-rewrite(8) daemon.  This pro-
       gram expects to be run from the master(8) process manager.

       Mail addressed to the local double-bounce address is  logged  and  dis-
       carded.   This  stops  potential  loops  caused by undeliverable bounce
       notifications.

MAIL QUEUES
       The oqmgr(8) daemon maintains the following queues:

       incoming
              Inbound mail from the network, or mail picked up  by  the  local
              pickup(8) agent from the maildrop directory.

       active Messages  that the queue manager has opened for delivery. Only a
              limited number of messages is allowed to enter the active  queue
              (leaky bucket strategy, for a fixed delivery rate).

       deferred
              Mail  that  could  not  be delivered upon the first attempt. The
              queue manager implements exponential  backoff  by  doubling  the
              time between delivery attempts.

       corrupt
              Unreadable or damaged queue files are moved here for inspection.

       hold   Messages that are kept "on hold" are  kept  here  until  someone
              sets them free.

DELIVERY STATUS REPORTS
       The oqmgr(8) daemon keeps an eye on per-message delivery status reports
       in the following directories. Each status report file has the same name
       as the corresponding message file:

       bounce Per-recipient  status  information  about  why  mail is bounced.
              These files are maintained by the bounce(8) daemon.

       defer  Per-recipient status information  about  why  mail  is  delayed.
              These files are maintained by the defer(8) daemon.

       trace  Per-recipient  status  information as requested with the Postfix
              "sendmail -v" or "sendmail -bv" command.  These files are  main-
              tained by the trace(8) daemon.

       The  oqmgr(8)  daemon is responsible for asking the bounce(8), defer(8)
       or trace(8) daemons to send delivery reports.

STRATEGIES
       The queue manager implements a variety of strategies for either opening
       queue files (input) or for message delivery (output).

       leaky bucket
              This  strategy limits the number of messages in the active queue
              and prevents the queue manager from running out of memory  under
              heavy load.

       fairness
              When the active queue has room, the queue manager takes one mes-
              sage from the incoming queue and one from  the  deferred  queue.
              This prevents a large mail backlog from blocking the delivery of
              new mail.

       slow start
              This strategy eliminates "thundering herd"  problems  by  slowly
              adjusting the number of parallel deliveries to the same destina-
              tion.

       round robin
              The  queue  manager  sorts  delivery  requests  by  destination.
              Round-robin  selection  prevents one destination from dominating
              deliveries to other destinations.

       exponential backoff
              Mail  that  cannot  be  delivered  upon  the  first  attempt  is
              deferred.   The  time interval between delivery attempts is dou-
              bled after each attempt.

       destination status cache
              The queue manager avoids unnecessary delivery attempts by  main-
              taining  a  short-term,  in-memory  list of unreachable destina-
              tions.

TRIGGERS
       On an idle system, the queue manager waits for the arrival  of  trigger
       events, or it waits for a timer to go off. A trigger is a one-byte mes-
       sage.  Depending on the message received, the  queue  manager  performs
       one  of  the following actions (the message is followed by the symbolic
       constant used internally by the software):

       D (QMGR_REQ_SCAN_DEFERRED)
              Start a deferred queue  scan.   If  a  deferred  queue  scan  is
              already  in  progress, that scan will be restarted as soon as it
              finishes.

       I (QMGR_REQ_SCAN_INCOMING)
              Start an incoming queue scan.  If  an  incoming  queue  scan  is
              already  in  progress, that scan will be restarted as soon as it
              finishes.

       A (QMGR_REQ_SCAN_ALL)
              Ignore deferred queue file time stamps. The request affects  the
              next deferred queue scan.

       F (QMGR_REQ_FLUSH_DEAD)
              Purge all information about dead transports and destinations.

       W (TRIGGER_REQ_WAKEUP)
              Wakeup  call,  This  is used by the master server to instantiate
              servers that should not go away forever. The action is to  start
              an incoming queue scan.

       The oqmgr(8) daemon reads an entire buffer worth of triggers.  Multiple
       identical trigger requests are collapsed into one, and trigger requests
       are  sorted  so that A and F precede D and I. Thus, in order to force a
       deferred queue run, one would request A F D; in  order  to  notify  the
       queue manager of the arrival of new mail one would request I.

STANDARDS
       RFC 3463 (Enhanced status codes)
       RFC 3464 (Delivery status notifications)

SECURITY
       The  oqmgr(8) daemon is not security sensitive. It reads single-charac-
       ter messages from untrusted local users, and thus may be susceptible to
       denial  of  service  attacks.  The oqmgr(8) daemon does not talk to the
       outside world, and it can be run at fixed low privilege in  a  chrooted
       environment.

DIAGNOSTICS
       Problems  and  transactions  are  logged to the syslog(8) daemon.  Cor-
       rupted message files are saved to the corrupt queue for further inspec-
       tion.

       Depending  on the setting of the notify_classes parameter, the postmas-
       ter is notified of bounces and of other trouble.

BUGS
       A single queue manager process has to compete for disk access with mul-
       tiple front-end processes such as cleanup(8). A sudden burst of inbound
       mail can negatively impact outbound delivery rates.

CONFIGURATION PARAMETERS
       Changes to main.cf are not picked up automatically, as  oqmgr(8)  is  a
       persistent process. Use the command "postfix reload" after a configura-
       tion change.

       The text below provides only a parameter summary. See  postconf(5)  for
       more details including examples.

       In the text below, transport is the first field in a master.cf entry.

COMPATIBILITY CONTROLS
       Available before Postfix version 2.5:

       allow_min_user (no)
              Allow  a  sender  or  recipient address to have `-' as the first
              character.

ACTIVE QUEUE CONTROLS
       qmgr_clog_warn_time (300s)
              The minimal delay between warnings that a  specific  destination
              is clogging up the Postfix active queue.

       qmgr_message_active_limit (20000)
              The maximal number of messages in the active queue.

       qmgr_message_recipient_limit (20000)
              The  maximal  number of recipients held in memory by the Postfix
              queue manager, and the maximal size of the size  of  the  short-
              term, in-memory "dead" destination status cache.

DELIVERY CONCURRENCY CONTROLS
       qmgr_fudge_factor (100)
              Obsolete  feature:  the  percentage of delivery resources that a
              busy mail system will use up for delivery  of  a  large  mailing
              list message.

       initial_destination_concurrency (5)
              The  initial  per-destination  concurrency  level  for  parallel
              delivery to the same destination.

       default_destination_concurrency_limit (20)
              The default maximal number of parallel deliveries  to  the  same
              destination.

       transport_destination_concurrency_limit   ($default_destination_concur-
       rency_limit)
              Idem, for delivery via the named message transport.

       Available in Postfix version 2.5 and later:

       transport_initial_destination_concurrency ($initial_destination_concur-
       rency)
              Initial  concurrency  for  delivery via the named message trans-
              port.

       default_destination_concurrency_failed_cohort_limit (1)
              How many pseudo-cohorts  must  suffer  connection  or  handshake
              failure  before a specific destination is considered unavailable
              (and further delivery is suspended).

       transport_destination_concurrency_failed_cohort_limit  ($default_desti-
       nation_concurrency_failed_cohort_limit)
              Idem, for delivery via the named message transport.

       default_destination_concurrency_negative_feedback (1)
              The per-destination  amount  of  delivery  concurrency  negative
              feedback,  after a delivery completes with a connection or hand-
              shake failure.

       transport_destination_concurrency_negative_feedback  ($default_destina-
       tion_concurrency_negative_feedback)
              Idem, for delivery via the named message transport.

       default_destination_concurrency_positive_feedback (1)
              The per-destination  amount  of  delivery  concurrency  positive
              feedback, after a delivery completes without connection or hand-
              shake failure.

       transport_destination_concurrency_positive_feedback  ($default_destina-
       tion_concurrency_positive_feedback)
              Idem, for delivery via the named message transport.

       destination_concurrency_feedback_debug (no)
              Make the queue manager's feedback algorithm verbose for  perfor-
              mance analysis purposes.

RECIPIENT SCHEDULING CONTROLS
       default_destination_recipient_limit (50)
              The default maximal number of recipients per message delivery.

       transport_destination_recipient_limit
              Idem, for delivery via the named message transport.

OTHER RESOURCE AND RATE CONTROLS
       minimal_backoff_time (300s)
              The minimal time between attempts to deliver a deferred message;
              prior to Postfix 2.4 the default value was 1000s.

       maximal_backoff_time (4000s)
              The maximal time between attempts to deliver a deferred message.

       maximal_queue_lifetime (5d)
              The  maximal  time a message is queued before it is sent back as
              undeliverable.

       queue_run_delay (300s)
              The time between deferred queue  scans  by  the  queue  manager;
              prior to Postfix 2.4 the default value was 1000s.

       transport_retry_time (60s)
              The  time  between attempts by the Postfix queue manager to con-
              tact a malfunctioning message delivery transport.

       Available in Postfix version 2.1 and later:

       bounce_queue_lifetime (5d)
              The maximal time a bounce message is queued before it is consid-
              ered undeliverable.

       Available in Postfix version 2.5 and later:

       default_destination_rate_delay (0s)
              The  default amount of delay that is inserted between individual
              deliveries to the same destination; with per-destination recipi-
              ent  limit  >  1,  a  destination is a domain, otherwise it is a
              recipient.

       transport_destination_rate_delay $default_destination_rate_delay
              Idem, for delivery via the named message transport.

MISCELLANEOUS CONTROLS
       config_directory (see 'postconf -d' output)
              The default location of the Postfix main.cf and  master.cf  con-
              figuration files.

       defer_transports (empty)
              The names of message delivery transports that should not deliver
              mail unless someone issues "sendmail -q" or equivalent.

       delay_logging_resolution_limit (2)
              The maximal number of digits after the decimal point  when  log-
              ging sub-second delay values.

       helpful_warnings (yes)
              Log  warnings about problematic configuration settings, and pro-
              vide helpful suggestions.

       ipc_timeout (3600s)
              The time limit for sending  or  receiving  information  over  an
              internal communication channel.

       process_id (read-only)
              The process ID of a Postfix command or daemon process.

       process_name (read-only)
              The process name of a Postfix command or daemon process.

       queue_directory (see 'postconf -d' output)
              The location of the Postfix top-level queue directory.

       syslog_facility (mail)
              The syslog facility of Postfix logging.

       syslog_name (see 'postconf -d' output)
              The  mail  system  name that is prepended to the process name in
              syslog records, so that "smtpd"  becomes,  for  example,  "post-
              fix/smtpd".

FILES
       /var/spool/postfix/incoming, incoming queue
       /var/spool/postfix/active, active queue
       /var/spool/postfix/deferred, deferred queue
       /var/spool/postfix/bounce, non-delivery status
       /var/spool/postfix/defer, non-delivery status
       /var/spool/postfix/trace, delivery status

SEE ALSO
       trivial-rewrite(8), address routing
       bounce(8), delivery status reports
       postconf(5), configuration parameters
       master(5), generic daemon options
       master(8), process manager
       syslogd(8), system logging

README FILES
       Use  "postconf readme_directory" or "postconf html_directory" to locate
       this information.
       QSHAPE_README, Postfix queue analysis

LICENSE
       The Secure Mailer license must be distributed with this software.

AUTHOR(S)
       Wietse Venema
       IBM T.J. Watson Research
       P.O. Box 704
       Yorktown Heights, NY 10598, USA



                                                                      OQMGR(8)

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen