MOUNT_PROCFS(8)         NetBSD System Manager's Manual         MOUNT_PROCFS(8)

NAME
     mount_procfs -- mount the process file system

SYNOPSIS
     mount_procfs [-o options] /proc mount_point

DESCRIPTION
     The mount_procfs command attaches an instance of the process namespace to
     the global filesystem namespace.  The conventional mount point is /proc.
     The directory specified by mount_point is converted to an absolute path
     before use.  This command is normally executed by mount(8) at boot time.

     The options are as follows:

     -o nolinux
             Do not support nodes which are not part of the original procfs
             implementation but have been added for compatibility with the
             Linux procfs namespace.  See FILES for more information.

     The root of the process filesystem contains an entry for each active
     process.  These processes are visible as a directory whose name is the
     process' pid.  In addition, the special entries curproc and self refer-
     ence the current process.  The self symlink appears for compatibility
     with the Linux procfs implementation.

     Each directory contains several files.

     cmdline
             This file is readonly and returns null-terminated strings corre-
             sponding to the process' command line arguments.  For a system or
             zombie process, this file contains only a string with the name of
             the process.

     ctl     a writeonly file which supports a variety of control operations.
             Control commands are written as strings to the ctl file.  The
             control commands are:
             attach  stops the target process and arranges for the sending
                     process to become the debug control process.
             detach  continue execution of the target process and remove it
                     from control by the debug process.
             run     continue running the target process until a signal is
                     delivered, a breakpoint is hit, or the target process
                     exits.
             step    single step the target process, with no signal delivery.
             wait    wait for the target process to stop.  The target process
                     must be stopped before any of the run, step, or signal
                     commands are allowed.

             The string can also be the name of a signal, lower case and with-
             out the SIG prefix, in which case that signal is delivered to the
             process (see sigaction(2)).

     cwd     A symbolic link that points to the current working directory of
             the process.  If the target process's current working directory
             is not available or is not at or below the current process's root
             directory, this link will point to ``/''.

     fd/#    File descriptors which can be accessed through the file system.
             See fd(4) for more information.

     file    A reference to the vnode from which the process text was read.
             This can be used to gain access to the process' symbol table, or
             to start another copy of the process.

     map     A map of the process' virtual memory.

     maps    A map of the process' virtual memory in a form like the proc
             filesystem as implemented in Linux.  Note that the paths corre-
             sponding to file backed mappings will not be present unless the
             kernel was built with the NAMECACHE_ENTER_REVERSE option.

     mem     The complete virtual memory image of the process.  Only those
             addresses which exist in the process can be accessed.  Writes to
             this file modify the process.  Writes to the text segment nor-
             mally remain private to the process, since the text segment is
             mapped with MAP_PRIVATE; however, this is not guaranteed.

     note    Not implemented.

     notepg  Not implemented.

     regs    Allows read and write access to the process' register set.  This
             file contains a binary data structure struct regs defined in
             <machine/reg.h>.  regs can only be written when the process is
             stopped.

     fpregs  The floating point registers as defined by struct fpregs in
             <machine/reg.h>.  fpregs is only implemented on machines which
             have distinct general purpose and floating point register sets.

     root    A symbolic link that points to the root directory of the process.
             If the target process's root directory is not available or is not
             at or below the current process's root directory, this link will
             point to ``/''.

     status  The process status.  This file is readonly and returns a single
             line containing multiple space-separated fields as follows:

                command name
                process id
                parent process id
                process group id
                session id
                major,minor of the controlling terminal, or -1,-1 if there is
                 no controlling terminal.
                a list of process flags: ctty if there is a controlling ter-
                 minal, sldr if the process is a session leader, noflags if
                 neither of the other two flags are set.
                the process start time in seconds and microseconds, comma
                 separated.
                the user time in seconds and microseconds, comma separated.
                the system time in seconds and microseconds, comma separated.
                the wait channel message
                the process credentials consisting of the effective user id
                 and the list of groups (whose first member is the effective
                 group id) all comma separated.

     In a normal debugging environment, where the target is fork/exec'd by the
     debugger, the debugger should fork and the child should stop itself (with
     a self-inflicted SIGSTOP for example).  The parent should issue a wait
     and then an attach command via the appropriate ctl file.  The child
     process will receive a SIGTRAP immediately after the call to exec (see
     execve(2)).

FILES
     /proc/#
     /proc/#/cmdline
     /proc/#/ctl
     /proc/#/cwd
     /proc/#/exe
     /proc/#/file
     /proc/#/fpregs
     /proc/#/map
     /proc/#/maps
     /proc/#/mem
     /proc/#/note
     /proc/#/notepg
     /proc/#/regs
     /proc/#/root
     /proc/#/status
     /proc/curproc
     /proc/self

     If the linux mount option is used, the following files are also avail-
     able:

     /proc/#/stat
     /proc/cpuinfo
     /proc/devices
     /proc/meminfo
     /proc/mounts
     /proc/uptime

SEE ALSO
     mount(2), sigaction(2), unmount(2)

HISTORY
     The mount_procfs utility first appeared in 4.4BSD.

BUGS
     This filesystem may not be NFS-exported since most of the functionality
     of procfs requires that state be maintained.

NetBSD 6.1.5                   February 24, 2009                  NetBSD 6.1.5

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen