KUE(4)                  NetBSD Kernel Interfaces Manual                 KUE(4)

NAME
     kue -- Kawasaki LSI KL5KUSB101B USB Ethernet driver

SYNOPSIS
     kue* at uhub?

HARDWARE
     The kue driver supports the following adapters:

           3Com 3c19250
           3Com 3c460 HomeConnect Ethernet USB Adapter
           Abocom URE450
           ADS Technologies USB-10BT
           Aox USB101
           ATen UC10T
           Corega EtherUSB
           D-Link DSB-650
           Entrega NET-USB-E45
           I/O Data USB-ET/T
           Kawasaki USB101
           LinkSys USB10T
           Netgear EA101
           Peracom USB Ethernet Adapter (3 models)
           SMC 2102USB
           SMC 2104USB

DESCRIPTION
     The kue driver provides support for USB Ethernet adapters based on the
     Kawasaki LSI KL5KLUSB101B chipset.

     The KL5KLUSB101B supports a 128-entry multicast filter, single perfect
     filter entry for the station address and promiscuous mode.  Packets are
     received and transmitted over separate USB bulk transfer endpoints.

     The Kawasaki adapter supports only 10Mbps half-duplex mode, hence there
     are no ifmedia(4) modes to select.

     For more information on configuring this device, see ifconfig(8).

DIAGNOSTICS
     kue%d: watchdog timeout  A packet was queued for transmission and a
     transmit command was issued, however the device failed to acknowledge the
     transmission before a timeout expired.

     kue%d: no memory for rx list  The driver failed to allocate an mbuf for
     the receiver ring.

SEE ALSO
     arp(4), netintro(4), usb(4), ifconfig(8)

HISTORY
     The kue device driver first appeared in FreeBSD 4.0, and in NetBSD 1.5.

AUTHORS
     The kue driver was written by Bill Paul <wpaul@ee.columbia.edu>.

BUGS
     The kue driver does not accumulate Ethernet collisions statistics because
     the Kawasaki firmware does not appear to maintain any internal statis-
     tics.

NetBSD 6.0                      January 4, 2000                     NetBSD 6.0

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen