ISO(4)                  NetBSD Kernel Interfaces Manual                 ISO(4)

     iso -- ISO protocol family

     #include <sys/types.h>
     #include <netiso/iso.h>

     The ISO protocol family is a collection of protocols that uses the ISO
     address format.  The ISO family provides protocol support for the
     SOCK_SEQPACKET abstraction through the TP protocol (ISO 8073), for the
     SOCK_DGRAM abstraction through the connectionless transport protocol (ISO
     8602), and for the SOCK_RAW abstraction by providing direct access (for
     debugging) to the CLNP (ISO 8473) network layer protocol.

     ISO addresses are based upon ISO 8348/AD2, Addendum to the Network
     Service Definition Covering Network Layer Addressing.

     Sockets bound to the OSI protocol family use the following address struc-

     struct iso_addr {
          u_char    isoa_len;  /* length, not including this byte */
          char      isoa_genaddr[20];  /* general opaque address */

     struct sockaddr_iso {
          u_char          siso_len;      /* size of this sockaddr */
          sa_family_t     siso_family;   /* addressing domain, AF_ISO */
          u_char          siso_plen;     /* presentation selector length */
          u_char          siso_slen;     /* session selector length */
          u_char          siso_tlen;     /* transport selector length */
          struct iso_addr siso_addr; /* network address */
          u_char          siso_pad[6];    /* space for gosip v2 SELs */
     #define siso_nlen siso_addr.isoa_len
     #define siso_data siso_addr.isoa_genaddr

     The fields of this structure are:

             Length of the entire address structure, in bytes, which may grow
             to be longer than the 32 bytes shown above.

             Identifies the domain: AF_ISO.

             Length of the transport selector.

             Length of the session selector.  This is not currently supported
             by the kernel and is provided as a convenience for user level

             Length of the presentation selector.  This is not currently sup-
             ported by the kernel and is provided as a convenience for user
             level programs.

             The network part of the address, described below.

     An ISO transport address is similar to an Internet address in that it
     contains a network-address portion and a portion that the transport layer
     uses to multiplex its services among clients.  In the Internet domain,
     this portion of the address is called a port.  In the ISO domain, this is
     called a transport selector (also known at one time as a transport
     suffix).  While ports are always 16 bits, transport selectors may be of
     (almost) arbitrary size.

     Since the C language does not provide convenient variable length struc-
     tures, we have separated the selector lengths from the data themselves.
     The network address and various selectors are stored contiguously, with
     the network address first, then the transport selector, and so on.  Thus,
     if you had a network address of less than 20 bytes, the transport selec-
     tor would encroach on space normally reserved for the network address.

     ISO network addresses are limited to 20 bytes in length.  ISO network
     addresses can take any format.

     The ARGO 1.0 implementation of the ISO protocol family comprises the Con-
     nectionless-Mode Network Protocol (CLNP), and the Transport Protocol
     (TP), classes 4 and 0, and X.25.  TP is used to support the
     SOCK_SEQPACKET abstraction.  A raw interface to CLNP is available by cre-
     ating an ISO socket of type SOCK_RAW.  This is used for CLNP debugging

     clnp(4), cltp(4), tp(4)

NetBSD 5.0.1                   November 30, 1993                  NetBSD 5.0.1

You can also request any man page by name and (optionally) by section:


Use the DEFAULT collection to view manual pages for third-party software.

©1994 Man-cgi 1.15, Panagiotis Christias
©1996-2018 Modified for NetBSD by Kimmo Suominen