ISCSI-TARGET(8)         NetBSD System Manager's Manual         ISCSI-TARGET(8)

NAME
     iscsi-target -- service remote iSCSI requests

SYNOPSIS
     iscsi-target [-46DV] [-b block length] [-f configuration file]
                  [-p port number] [-s maximum number of sessions]
                  [-t target name] [-v verbose arg]

DESCRIPTION
     iscsi-target is the server for iSCSI requests from iSCSI initiators.
     iscsi-target listens for discovery and login requests on the required
     port, and responds to those requests appropriately.

     Options and operands available for iscsi-target:

     -4      iscsi-target will listen for IPv4 connections, and respond back
             using IPv4.  This is the default address family.

     -6      iscsi-target will listen for IPv6 connections, and respond back
             using IPv6.

     -b blocksize
             Specify the underlying block size for iSCSI storage which will be
             served.  The possible sizes are: 512, 1024, 2048, and 4096 bytes,
             with the default being 512 bytes.

     -D      When this option is specified, iscsi-target will not detach
             itself from the controlling tty, and will not become a daemon.
             This can be useful for debugging purposes.

     -f configfile
             Use the named file as the configuration file.  The default file
             can be found in /etc/iscsi/targets.  See targets(5) for more
             information.

     -p port number
             Use the port number provided as the argument as the port on which
             to listen for iSCSI service requests from initiators.

     -s maximum number of sessions
             Allow the maximum number of sessions to be initiated when con-
             necting to the target.

     -t filename
             The target name (as it appears to the iSCSI initiator) can be
             specified using this flag.

     -V      iscsi-target will print the utility name and version number, and
             the address for bug reports, and then exit.

     -v argument
             The amount of information shown can be varied by using this com-
             mand.  Possible values of argument are net to show network-
             related information, iscsi to show iSCSI protocol-related infor-
             mation, scsi to show SCSI protocol information, and all to show
             information from all of the above arguments.

FILES
     /etc/iscsi/targets         the list of exported storage
     /var/run/iscsi-target.pid  the PID of the currently running iscsi-target

SEE ALSO
     targets(5)

HISTORY
     The iscsi-target utility first appeared in NetBSD 4.0.

NetBSD 5.0_RC4                   May 27, 2006                   NetBSD 5.0_RC4

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen