INET(4)                 NetBSD Kernel Interfaces Manual                INET(4)

NAME
     inet -- Internet protocol family

SYNOPSIS
     #include <sys/types.h>
     #include <netinet/in.h>

DESCRIPTION
     The Internet protocol family is a collection of protocols layered atop
     the Internet Protocol (IP) transport layer, and using the Internet
     address format.  The Internet family provides protocol support for the
     SOCK_STREAM, SOCK_DGRAM, and SOCK_RAW socket types; the SOCK_RAW inter-
     face provides access to the IP protocol.

ADDRESSING
     Internet addresses are four byte quantities, stored in network standard
     format (on the VAX these are word and byte reversed).  The include file
     <netinet/in.h> defines this address as a discriminated union.

     Sockets bound to the Internet protocol family use the following address-
     ing structure,

           struct sockaddr_in {
                   uint8_t         sin_len;
                   sa_family_t     sin_family;
                   in_port_t       sin_port;
                   struct in_addr  sin_addr;
                   int8_t          sin_zero[8];
           };

     Sockets may be created with the local address INADDR_ANY to effect
     ``wildcard'' matching on incoming messages.  The address in a connect(2)
     or sendto(2) call may be given as INADDR_ANY to mean ``this host''.  The
     distinguished address INADDR_BROADCAST is allowed as a shorthand for the
     broadcast address on the primary network if the first network configured
     supports broadcast.

PROTOCOLS
     The Internet protocol family comprises the IP transport protocol, Inter-
     net Control Message Protocol (ICMP), Transmission Control Protocol (TCP),
     and User Datagram Protocol (UDP).  TCP is used to support the SOCK_STREAM
     abstraction while UDP is used to support the SOCK_DGRAM abstraction.  A
     raw interface to IP is available by creating an Internet socket of type
     SOCK_RAW.  The ICMP message protocol is accessible from a raw socket.

     The 32-bit Internet address contains both network and host parts.  It is
     frequency-encoded; the most-significant bit is clear in Class A
     addresses, in which the high-order 8 bits are the network number.  Class
     B addresses use the high-order 16 bits as the network field, and Class C
     addresses have a 24-bit network part.  Sites with a cluster of local net-
     works and a connection to the Internet may chose to use a single network
     number for the cluster; this is done by using subnet addressing.  The
     local (host) portion of the address is further subdivided into subnet and
     host parts.  Within a subnet, each subnet appears to be an individual
     network; externally, the entire cluster appears to be a single, uniform
     network requiring only a single routing entry.  Subnet addressing is
     enabled and examined by the following ioctl(2) commands on a datagram
     socket in the Internet domain; they have the same form as the SIOCIFADDR
     command (see netintro(4)).

     SIOCSIFNETMASK  Set interface network mask.  The network mask defines the
                     network part of the address; if it contains more of the
                     address than the address type would indicate, then sub-
                     nets are in use.

     SIOCGIFNETMASK  Get interface network mask.

SEE ALSO
     ioctl(2), socket(2), icmp(4), intro(4), ip(4), netintro(4), tcp(4),
     udp(4)

     Stuart Sechrest, An Introductory 4.4BSD Interprocess Communication
     Tutorial.  (see /usr/share/doc/psd/20.ipctut)

     Samuel J. Leffler, Robert S. Fabry, William N. Joy, Phil Lapsley, Steve
     Miller, and Chris Torek, Advanced 4.4BSD IPC Tutorial.  (see
     /usr/share/doc/psd/21.ipc)

HISTORY
     The inet protocol interface appeared in 4.2BSD.

BUGS
     The Internet protocol support is subject to change as the Internet proto-
     cols develop.  Users should not depend on details of the current imple-
     mentation, but rather the services exported.

NetBSD 5.0_RC4                   May 15, 2003                   NetBSD 5.0_RC4

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen