GRFCV3D(4)           NetBSD/amiga Kernel Interfaces Manual          GRFCV3D(4)

NAME
     grfcv3d -- 8/15/16/24/32-bit color graphics driver

SYNOPSIS
     grfcv3d0 at zbus0
     grf7 at grfcv3d0
     ite7 at grf7
     wsdisplay* at grf7

DESCRIPTION
     The grfcv3d device driver supports graphics boards with the S3 Virge
     chipset.  It supports the minimal ioctl's needed to run X11.

HARDWARE
     The grfcv3d interface supports the following ZorroII/III expansion card:

           CyberVision 64/3D  A Zorro II/III card.  From phase5, manufacturer
                              8512, product 67.

FILES
     /dev/grf7   graphics interface special file
     /dev/ttye7  console interface special file for the internal terminal emu-
                 lator

SEE ALSO
     console(4), grfcv(4), ite(4), grfconfig(8)

HISTORY
     The grfcv3d interface first appeared in NetBSD 1.3.  It was modified for
     NetBSD 6.0 to support wsdisplay(4) interface.

AUTHORS
     The grfcv3d driver was written by Tobias Abt based on grfcv(4) driver.
     Bernd Ernesti.  fixed multipie bugs and later maintained the driver.  The
     wsdisplay(4) interface was added by Frank Wille and Radoslaw Kujawa.

BUGS
     grfcv3d does not support the sync-on-green flag from grfconfig(8).

     The wsdisplay(4) interface does not support all functionality provided by
     the driver and it can not be used at the same time as ite(4).  X11 is not
     supported with wsdisplay(4).  It needs more testing.

NetBSD 6.0                     November 9, 2012                     NetBSD 6.0

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen