ESIOP(4)                NetBSD Kernel Interfaces Manual               ESIOP(4)

NAME
     esiop -- Enhanced Symbios Logic/NCR 53c8xx SCSI driver

SYNOPSIS
     esiop* at pci? dev ? function ?
     options SIOP_SYMLED
     scsibus* at esiop?

DESCRIPTION
     The esiop driver provides improved support over siop(4) for the Symbios
     Logic/NCR 53x8xx series of SCSI controller chips:

           -   53c825 and 53c825a (Fast-Wide SCSI)
           -   53c875 and 53c875j (Ultra-Wide SCSI)
           -   53c876 (Dual Ultra-Wide SCSI)
           -   53c885 (Ultra-Wide SCSI and Ethernet)
           -   53c895 (Ultra2-Wide SCSI)
           -   53c896 (PCI 64bit, dual Ultra2-Wide SCSI)
           -   53c1010-33 (PCI 64bit, dual Ultra160 SCSI)
           -   53c1510d (PCI 64bit, dual Ultra2-wide SCSI)
     Older adapters are supported by the siop(4) driver.

     The SIOP_SYMLED option causes the driver to report SCSI activity on the
     GPIO pin 1, which is connected to the activity LED on some adapters. At
     this time only the 53c895 based Symbios and Tekram adapters are known to
     require this.

SEE ALSO
     cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), siop(4), st(4), uk(4)

HISTORY
     The esiop driver first appeared in NetBSD 1.6.

AUTHORS
     The esiop driver was written by Manuel Bouyer <Manuel.Bouyer@lip6.fr> for
     NetBSD.

NetBSD 5.1                      April 23, 2002                      NetBSD 5.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen