BGE(4)                  NetBSD Kernel Interfaces Manual                 BGE(4)

NAME
     bge -- Broadcom BCM570x family Gigabit Ethernet driver

SYNOPSIS
     bge* at pci? dev ? function ?

     Configuration of PHYs may also be necessary.  See mii(4).

DESCRIPTION
     The bge device driver supports Gigabit Ethernet interfaces based on the
     Broadcom BCM570x family of Gigabit Ethernet chips and the BCM5906 chip.
     The interfaces supported by the bge driver include:

     +   3Com 3c996-T (10BASE-T/100BASE-TX/1000BASE-T)

     +   Dell PowerEdge 2550 integrated BCM5700 NIC (10BASE-T/100BASE-
         TX/1000BASE-T)

     +   IBM x235 server integrated BCM5703x NIC (10BASE-T/100BASE-
         TX/1000BASE-T)

     +   Netgear GA302T (10BASE-T/100BASE-TX/1000BASE-T)

     +   SysKonnect SK-9D21 (10BASE-T/100BASE-TX/1000BASE-T)

     +   SysKonnect SK-9D41 (1000BASE-SX)

     The BCM570x family supports IPv4/TCP/UDP checksumming in hardware.  The
     bge driver supports this feature of the chip.  See ifconfig(8) for infor-
     mation on how to enable this feature.

SEE ALSO
     arp(4), bce(4), ifmedia(4), mii(4), netintro(4), pci(4), ifconfig(8)

HISTORY
     The bge driver first appeared in NetBSD 1.6.1.

AUTHORS
     The bge driver was written by Bill Paul <wpaul@windriver.com> for FreeBSD
     and ported to NetBSD by Frank van der Linden <fvdl@wasabisystems.com>,
     Jason R. Thorpe <thorpej@wasabisystems.com> and Jonathan Stone
     <jonathan@dsg.stanford.edu>.

NetBSD 5.0.1                    August 25, 2008                   NetBSD 5.0.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen