AMR(4)                  NetBSD Kernel Interfaces Manual                 AMR(4)

NAME
     amr -- AMI MegaRAID PCI-SCSI RAID driver

SYNOPSIS
     amr* at pci? dev ? function ?
     scsibus* at amr?

DESCRIPTION
     The amr driver provides support for LSI (formerly American Megatrends)
     MegaRAID Express, Elite and Enterprise family RAID controllers for SCSI
     and SATA, including models relabeled and sold by Dell, Hewlett-Packard,
     and Intel.  Supported controllers include:

     +   MegaRAID 320-1
     +   MegaRAID 320-2
     +   MegaRAID Series 418
     +   MegaRAID Enterprise 1200 (Series 428)
     +   MegaRAID Enterprise 1300 (Series 434)
     +   MegaRAID Enterprise 1400 (Series 438)
     +   MegaRAID Enterprise 1500 (Series 467)
     +   MegaRAID Enterprise 1600 (Series 471)
     +   MegaRAID Elite 1500 (Series 467)
     +   MegaRAID Elite 1600 (Series 493)
     +   MegaRAID Express 100 (Series 466WS)
     +   MegaRAID Express 200 (Series 466)
     +   MegaRAID Express 300 (Series 490)
     +   LSI MegaRAID SCSI 320-0X, 320-2X, 320-4X
     +   LSI MegaRAID SCSI 320-1E, 320-2E
     +   LSI MegaRAID SATA 300-6x, 300-8x
     +   Dell PERC
     +   Dell PERC 2/SC
     +   Dell PERC 2/DC
     +   Dell PERC 4/Di
     +   Dell PERC 4/SC
     +   Dell PERC 4e/Si
     +   HP NetRAID-1/Si
     +   HP NetRAID-3/Si
     +   HP Embedded NetRAID
     +   Intel SRCU42X
     +   Intel SRCU42E
     +   Intel SRMOBU42E
     +   Intel SRCS28X

DIAGNOSTICS
   Driver initialisation/shutdown phase
     amr%d: memory window not available
     amr%d: I/O window not available

     The PCI BIOS did not allocate resources necessary for the correct opera-
     tion of the controller.  The driver cannot attach to this controller.

     amr%d: busmaster bit not set, enabling

     The PCI BIOS did not enable busmaster DMA, which is required for the cor-
     rect operation of the controller.  The driver has enabled this bit and
     initialisation will proceed.

     amr%d: can't allocate register window
     amr%d: can't allocate interrupt
     amr%d: can't set up interrupt
     amr%d: can't allocate parent DMA tag
     amr%d: can't allocate buffer DMA tag
     amr%d: can't allocate scatter/gather DMA tag
     amr%d: can't allocate s/g table
     amr%d: can't allocate mailbox tag
     amr%d: can't allocate mailbox memory

     A resource allocation error occurred while initialising the driver; ini-
     tialisation has failed and the driver will not attach to this controller.

     amr%d: can't obtain configuration data from controller
     amr%d: can't obtain product data from controller

     The driver was unable to obtain vital configuration data from the con-
     troller.  Initialisation has failed and the driver will not attach to
     this controller.

     amr%d: can't establish configuration hook
     amr%d: can't scan controller for drives

     The scan for logical drives managed by the controller failed.  No drives
     will be attached.

     amr%d: device_add_child failed
     amr%d: bus_generic_attach returned %d

     Creation of the logical drive instances failed; attachment of one or more
     logical drives may have been aborted.

     amr%d: flushing cache...

     The controller cache is being flushed prior to shutdown or detach.

   Operational diagnostics
     amr%d: I/O beyond end of unit (%u,%d > %u)

     A partitioning error or disk corruption has caused an I/O request beyond
     the end of the logical drive.  This may also occur if FlexRAID Virtual
     Sizing is enabled and an I/O operation is attempted on a portion of the
     virtual drive beyond the actual capacity available.

     amr%d: polled command timeout

     An initialisation command timed out.  The initialisation process may fail
     as a result.

     amr%d: bad slot %d completed

     The controller reported completion of a command that the driver did not
     issue.  This may result in data corruption, and suggests a hardware or
     firmware problem with the system or controller.

     amr%d: I/O error - %x

     An I/O error has occurred.

SEE ALSO
     cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), st(4), amrctl(8)

NetBSD 5.1                       July 23, 2006                      NetBSD 5.1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen