AGP(4)                  NetBSD Kernel Interfaces Manual                 AGP(4)

NAME
     agp -- accelerated graphics port driver

SYNOPSIS
     agp* at pchb?

DESCRIPTION
     The agp driver provides machine-independent support for the accelerated
     graphics port (AGP) found on many PC-based and PCI systems.  The AGP
     specification was designed by Intel.

     The AGP chipset is positioned between the PCI-Host bridge and the graph-
     ics accelerator to provide a high-performance dedicated graphics bus for
     moving large amounts of data directly from host memory to the graphics
     accelerator.  The specification currently supports a peak bandwidth of
     528 MB/s.  AGP uses a Graphics Address Remapping Table (GART) to provide
     a physically-contiguous view of scattered pages in host memory for DMA
     transfers.

     The agp driver supports the following chipsets:

           -   ALI M1541 host-to-AGP bridge
           -   AMD 751 and 761 host-to-AGP bridges
           -   Intel 82810, 82810-DC100, 82810E, and 82815 SVGA controllers
           -   SiS 5591 host-to-AGP bridge
           -   VIA

     The agp driver also provides an interface to user processes for use by X
     servers.  A user process communicates to the device initially by means of
     ioctl(2) calls.  The calls supported are:

     AGPIOC_INFO
             Get AGP information, setting the members in the agp_info struc-
             ture as defined in <sys/agpio.h>:

             typedef struct _agp_info {
                     agp_version version;    /* version of the driver        */
                     uint32_t bridge_id;     /* bridge vendor/device         */
                     uint32_t agp_mode;      /* mode info of bridge          */
                     off_t aper_base;        /* base of aperture             */
                     size_t aper_size;       /* size of aperture             */
                     size_t pg_total;        /* max pages (swap + system)    */
                     size_t pg_system;       /* max pages (system)           */
                     size_t pg_used;         /* current pages used           */
             } agp_info;

     AGPIOC_ACQUIRE
             Acquire AGP.

     AGPIOC_RELEASE
             Release AGP.

     AGPIOC_SETUP
             Set up AGP, using the members in the agp_setup structure as
             defined in <sys/agpio.h>:

             typedef struct _agp_setup {
                     uint32_t agp_mode;      /* mode info of bridge          */
             } agp_setup;

     AGPIOC_ALLOCATE
             Allocate AGP space, using and setting the members in the
             agp_allocate structure as defined in <sys/agpio.h>:

             typedef struct _agp_allocate {
                     int key;                /* tag of allocation            */
                     size_t pg_count;        /* number of pages              */
                     uint32_t type;          /* 0 == normal, other devspec   */
                     uint32_t physical;      /* device specific (some devices
                                              * need a phys address of the
                                              * actual page behind the gatt
                                              * table)                       */
             } agp_allocate;

     AGPIOC_DEALLOCATE
             Deallocate AGP space.

     AGPIOC_BIND
             Bind AGP space, using the members in the agp_bind structure as
             defined in <sys/agpio.h>:

             typedef struct _agp_bind {
                     int key;                /* tag of allocation            */
                     off_t pg_start;         /* starting page to populate    */
             } agp_bind;

     AGPIOC_UNBIND
             Unbind AGP space, using the members in the agp_unbind structure
             as defined in <sys/agpio.h>:

             typedef struct _agp_unbind {
                     int key;                /* tag of allocation            */
                     uint32_t priority;      /* priority for paging out      */
             } agp_unbind;

FILES
     /dev/agp?     AGP GART device special files
     /dev/agpgart  AGP GART device special file

EXAMPLES
     This short code fragment is an example of opening the AGP device and per-
     forming some basic operations:

     #include <sys/types.h>
     #include <sys/ioctl.h>
     #include <sys/agpio.h>
     #include <fcntl.h>
     #include <err.h>

     int
     main(int argc, char **argv)
     {
             int fd;
             agp_info info;
             agp_allocate alloc;
             agp_setup setup;
             agp_bind bind;
             agp_unbind unbind;

             fd = open("/dev/agp0", O_RDWR);
             if (fd < 0)
                     err(1, "open");

             if (ioctl(fd, AGPIOC_INFO, &info) < 0)
                     err(2, "ioctl AGPIOC_INFO");

             printf("version:        %u.%u\n", info.version.major,
                 info.version.minor);

             printf("id:             %x\n", info.bridge_id);
             printf("mode:           %x\n", info.agp_mode);
             printf("base:           %x\n", info.aper_base);
             printf("size:           %uM\n", info.aper_size);
             printf("total mem:      %u\n", info.pg_total);
             printf("system mem:     %u\n", info.pg_system);
             printf("used mem:       %u\n\n", info.pg_used);

             setup.agp_mode = info.agp_mode;

             if (ioctl(fd, AGPIOC_SETUP, &setup) < 0)
                     err(3, "ioctl AGPIOC_SETUP");

             if (ioctl(fd, AGPIOC_ACQUIRE, 0) < 0)
                     err(3, "ioctl AGPIOC_ACQUIRE");

             alloc.type = 0;
             alloc.pg_count = 64;

             if (ioctl(fd, AGPIOC_ALLOCATE, &alloc) < 0)
                     err(4, "ioctl AGPIOC_ALLOCATE");

             printf("alloc key %d, paddr %x\n", alloc.key, alloc.physical);
             if (ioctl(fd, AGPIOC_INFO, &info) < 0)
                     err(5, "ioctl AGPIOC_INFO");

             bind.key = alloc.key;
             bind.pg_start = 0x1000;

             if (ioctl(fd, AGPIOC_BIND, &bind) < 0)
                     err(6, "ioctl AGPIOC_BIND");

             printf("used mem now:   %u\n\n", info.pg_used);

             unbind.key = alloc.key;
             unbind.priority = 0;

             if (ioctl(fd, AGPIOC_UNBIND, &unbind) < 0)
                     err(6, "ioctl AGPIOC_BIND");

             if (ioctl(fd, AGPIOC_DEALLOCATE, &alloc.key) < 0)
                     err(6, "ioctl AGPIOC_DEALLOCATE");

             if (ioctl(fd, AGPIOC_RELEASE, 0) < 0)
                     err(7, "ioctl AGPIOC_RELEASE");

             close(fd);

             printf("agp test successful\n");

             return 0;
     }

SEE ALSO
     ioctl(2), pci(4)

HISTORY
     The agp driver first appeared in FreeBSD 4.1.  It was adopted in
     NetBSD 1.6.

NetBSD 6.1.5                    October 3, 2010                   NetBSD 6.1.5

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen