STAT(2)                   NetBSD Programmer's Manual                   STAT(2)

NAME
     stat, lstat, fstat - get file status

LIBRARY
     Standard C Library (libc, -lc)

SYNOPSIS
     #include <sys/stat.h>

     int
     stat(const char *path, struct stat *sb);

     int
     lstat(const char *path, struct stat *sb);

     int
     fstat(int fd, struct stat *sb);

DESCRIPTION
     The stat() function obtains information about the file pointed to by
     path.  Read, write or execute permission of the named file is not re-
     quired, but all directories listed in the path name leading to the file
     must be searchable.

     lstat() is like stat() except in the case where the named file is a sym-
     bolic link, in which case lstat() returns information about the link,
     while stat() returns information about the file the link references.

     The fstat() function obtains the same information about an open file
     known by the file descriptor fd.

     The sb argument is a pointer to a stat structure as defined by
     <sys/stat.h> (shown below) and into which information is placed concern-
     ing the file.

     struct stat {
         dev_t     st_dev;     /* device containing the file */
         ino_t     st_ino;     /* file's serial number */
         mode_t    st_mode;    /* file's mode (protection and type) */
         nlink_t   st_nlink;   /* number of hard links to the file */
         uid_t     st_uid;     /* user-id of owner */
         gid_t     st_gid;     /* group-id of owner */
         dev_t     st_rdev;    /* device type, for device special file */
         struct timespec st_atimespec;  /* time of last access */
         struct timespec st_mtimespec;  /* time of last data modification */
         struct timespec st_ctimespec;  /* time of last file status change */
         off_t     st_size;    /* file size, in bytes */
         int64_t   st_blocks;  /* blocks allocated for file */
         u_int32_t st_blksize; /* optimal file sys I/O ops blocksize */
         u_int32_t st_flags;   /* user defined flags for file */
         u_int32_t st_gen;     /* file generation number */
     };

     The time-related fields of struct stat are as follows:

     st_atime     Time when file data was last accessed.  Changed by the
                  mknod(2), utimes(2) and read(2) system calls.

     st_mtime     Time when file data was last modified.  Changed by the
                  mknod(2), utimes(2) and write(2) system calls.

     st_ctime     Time when file status was last changed (file metadata modi-
                  fication).  Changed by the chflags(2), chmod(2), chown(2),
                  link(2), mknod(2), rename(2), unlink(2), utimes(2) and
                  write(2) system calls.

     The size-related fields of the struct stat are as follows:

     st_size        The size of the file in bytes.  A directory will be a mul-
                    tiple of the size of the dirent(5) structure.

     st_blksize     The optimal I/O block size for the file.

     st_blocks      The actual number of blocks allocated for the file in
                    512-byte units.  As short symbolic links are stored in the
                    inode, this number may be zero.

     The status information word st_mode has the following bits:

     #define S_IFMT 0170000           /* type of file */
     #define        S_IFIFO  0010000  /* named pipe (fifo) */
     #define        S_IFCHR  0020000  /* character special */
     #define        S_IFDIR  0040000  /* directory */
     #define        S_IFBLK  0060000  /* block special */
     #define        S_IFREG  0100000  /* regular */
     #define        S_IFLNK  0120000  /* symbolic link */
     #define        S_IFSOCK 0140000  /* socket */
     #define        S_IFWHT  0160000  /* whiteout */
     #define S_ISUID 0004000  /* set user id on execution */
     #define S_ISGID 0002000  /* set group id on execution */
     #define S_ISVTX 0001000  /* save swapped text even after use */
     #define S_IRUSR 0000400  /* read permission, owner */
     #define S_IWUSR 0000200  /* write permission, owner */
     #define S_IXUSR 0000100  /* execute/search permission, owner */
     #define S_IRGRP 0000040  /* read permission, group */
     #define S_IWGRP 0000020  /* write permission, group */
     #define S_IXGRP 0000010  /* execute/search permission, group */
     #define S_IROTH 0000004  /* read permission, other */
     #define S_IWOTH 0000002  /* write permission, other */
     #define S_IXOTH 0000001  /* execute/search permission, other */

     For a list of access modes, see <sys/stat.h>, access(2) and chmod(2).

     The status information word st_flags has the following bits:

     #define UF_NODUMP       0x00000001 /* do not dump file */
     #define UF_IMMUTABLE    0x00000002 /* file may not be changed */
     #define UF_APPEND       0x00000004 /* writes to file may only append */
     #define UF_OPAQUE       0x00000008 /* directory is opaque wrt. union */
     #define SF_ARCHIVED     0x00010000 /* file is archived */
     #define SF_IMMUTABLE    0x00020000 /* file may not be changed */
     #define SF_APPEND       0x00040000 /* writes to file may only append */

     For a description of the flags, see chflags(2).

RETURN VALUES
     Upon successful completion a value of 0 is returned.  Otherwise, a value
     of -1 is returned and errno is set to indicate the error.

COMPATIBILITY
     Previous versions of the system used different types for the st_dev,
     st_uid, st_gid, st_rdev, st_size, st_blksize and st_blocks fields.

ERRORS
     stat() and lstat() will fail if:

     [ENOTDIR]     A component of the path prefix is not a directory.

     [ENAMETOOLONG]
                   A component of a pathname exceeded {NAME_MAX} characters,
                   or an entire path name exceeded {PATH_MAX} characters.

     [ENOENT]      The named file does not exist.

     [EACCES]      Search permission is denied for a component of the path
                   prefix.

     [ELOOP]       Too many symbolic links were encountered in translating the
                   pathname.

     [EFAULT]      sb or name points to an invalid address.

     [EIO]         An I/O error occurred while reading from or writing to the
                   file system.

     [EBADF]       A badly formed v-node was encountered.  This can happen if
                   a file system information node is incorrect.

     fstat() will fail if:

     [EBADF]       fd is not a valid open file descriptor.

     [EFAULT]      sb points to an invalid address.

     [EIO]         An I/O error occurred while reading from or writing to the
                   file system.

SEE ALSO
     chflags(2), chmod(2), chown(2), utimes(2), dir(5), symlink(7)

STANDARDS
     The stat() and fstat() functions conform to IEEE Std 1003.1-1990
     (``POSIX'').

HISTORY
     A lstat() function call appeared in 4.2BSD.

BUGS
     Applying fstat() to a socket (and thus to a pipe) returns a zero'd
     buffer, except for the blocksize field, and a unique device and file se-
     rial number.

NetBSD 1.6                        May 1, 1995                                3

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias <christia@softlab.ntua.gr>
©1996-2014 Modified for NetBSD by Kimmo Suominen