DCA(4)                 NetBSD/hp300  Programmer's Manual                DCA(4)

NAME
     dca - HP98644A serial communications interface

SYNOPSIS
     dca0 at dio? scode 9 flags 0x1
     dca* at dio? scode ?

DESCRIPTION
     The 98644A is a single port EIA RS-232C (CCITT V.28) communications in-
     terface with a single character buffer.  Such an interface is built-in to
     all series 300 machines.

     Input and output for each line may set to one of following baud rates;
     50, 75, 110, 134.5, 150, 300, 600, 1200, 1800, 2400, 4800, 9600 or 19200.

     An optional argument flags may be set to 1 if the line should be treated
     as hard-wired with carrier always present or 0 if modem control is de-
     sired.

FILES
     /dev/tty0

DIAGNOSTICS
     dca%d: silo overflow.  The single-character input ``silo'' has overflowed
     and incoming data has been lost.

SEE ALSO
     dio(4), tty(4)

BUGS
     Data loss is possible on busy systems with baud rates greater than 300.
     The dca has never been tested with modem control enabled or on anything
     but the built-in interface.

NetBSD 1.6                       June 9, 1993                                1

You can also request any man page by name and (optionally) by section:

Command: 
Section: 
Architecture: 
Collection: 
 

Use the DEFAULT collection to view manual pages for third-party software.


©1994 Man-cgi 1.15, Panagiotis Christias
©1996-2018 Modified for NetBSD by Kimmo Suominen